- Running tubing...please read and reply GAME kinda !!!
- new clear check valve not compatable
- Natural vacuum versus clear lines
- How close can you place saddles in the mainline?
- What fitting for end of 5/16 tubing ???
- Tapping Depth - Vacuum tubing systems
- New Tubbing
- 7/16 to 7/16 check valve adaptor?
- Leader can't count
- Squirrel control?
- Rule of thumb? When to go to mainline?
- does rain, clouds, wind effect sap flow?
- Rotary Vane vs. liquid ring pump question
- 5/16 run length
- VIDEO: Is this natural vacuum?
- 7/16 or 5/16 spouts
- Tubing size
- maine line 20-30 taps?
- First time with tubbing. Gravity, NEED HELP
- kink
- Retapping, not reaming taps in the future "stained wood"
- sap ladder
- Need help with sciences of gravity
- Natural Vacuum using 5/16 tubing?
- Economics of changing spouts
- What hammer to use on plastic taps.
- Sap Ladder questions
- Premade droplines
- 150 Gallons Storage Pic of Tube Manifold
- stainless steel couplings
- Northern VT Getting Started (2013) For Real this time!!!
- how much?
- land boundry and tubing placement question. need some suggestions on what to do
- New to tubing. What are necessary tools?
- Connecting drops to lateral line
- How far would you go for one tap.
- Tubing tool plans??? Help!
- used mainline question
- Why are my trees bleeding need help.
- Angle off of a T
- Pulling 5/16" Tubing
- 1st Time Running Tubing Pics and Videos!
- Frozen sap in my lines, no sap in my collection tank.
- 5/16th shut off
- cost effective for small producers?
- Mainline ends
- Time to tap?
- Natural Gravity Vac?
- 1st Time Running Gravity Tubing- VIDEO!!!
- Sap flow
- What's the difference?
- Air in tubing
- Video Today... Possible Natural Vacuum?
- Bender Dumping Question
- will sap puller 200g create enough vac. to run lapierre double act sap pusher pump?
- Hands drying out from handling tubing?
- K-9 detection of vacuum leaks?
- Hanging lines
- Blue 5/16 Health Spiles
- Vaporlock question.?
- Mainline Wire
- Just a question...
- Stubborn Leak
- Battling a Y with a tubing tool
- Drops
- check valve on mainline gravity?
- This is really bothering me!
- Tough pulling out 800' of 1&1/4" dry line
- D&G Y End fitting
- First Short Line
- smart spout hole size
- mainline question
- basics of installing wet and dry lines
- How to measure vacuum?
- Cam lock connectors
- Sap in Drop Lines
- Change the design of the tip on checkvalve spouts.
- connecting moisture trap
- Cv spouts
- Drop Line Placement
- Impact drivers
- "leaking" lapierre seasonal spouts
- Time to tap?
- Does new tubing need to be flushed out.
- Any feed back for the clear 1 piece CV2's yet???
- Wood core quality from Tap Drill: What do you do?
- Mainline- Where to buy?
- Question
- Northern Vermont and Quebec
- new line hung up and full of sap... need help
- Bye bye hose clamp
- Deep and angle of tap hole?
- Line Size
- CDL Smart taps
- RUBIKS CUBE to me ?? End of line
- trees running but little sap in barrel
- New tubing in the woods - Rinse it first???
- Replacing Tap/Spouts and bucket drops every year?
- Venting lines ?
- cold weather tubing tool?
- How long does a tap last?
- Running Tubing,,Time Saver for me !!!
- Spout Removal Tool
- 7/16 metal vs 5/16 plastic
- Thought I'd punctured a rodent in the tree
- Ideas on removing broken check valves
- Mesmerized by watching the sap !!
- pluggin mailine hole
- venting sap tank questions.
- Health Spiles,,,45* and 90* angles,,,,hate 90,,GRRR
- Sap in dry line
- 7/16 tap.... drill size
- Triple Drop into my line,,,Mistake ?
- Advantage of a good slope ?
- Sap flow from a 5 tap run and a 11 tap run
- Buckets on a main line
- Tap holes
- Notice
- No sap in lines?
- Extended Freeze up After Tapping
- Big CAT chewed some of my tubing
- Trees in standing water question
- South Wind Blues
- Leaking Lines
- How long a piece of tubing from saddle to hooked connector?
- Maple or not?
- Vacuum
- Re tap?
- 3 sap ladders lift 36 feet one line it works!
- removeing 5/16th tubeing form a fitting?
- Tight lines.
- Pumping Sap long distances
- Translucent Straight Spout
- 5/16 Quick Connectors
- Larger trees.
- every good has it evil.
- snow on my mainlines
- Bear Damage
- Gravity Lines.
- Help with starting new gravity line tubing
- 5/16 Tree Saver Tip?
- will they still run?
- Thawing lines
- How high to place taps
- Fixing mainlin leak?
- Check valves for gravity lines
- Shadow grey tubing
- Plugging tap holes?
- open end or closed end on gravity lines?
- Want to go tubing next year
- Secluded sugar bush help/ideas
- Great year to test CV's
- 5/16 versus 7/16
- Old CV's vs. New CV's
- What do you do when trees start to bud
- Bite me!
- "Y" and "T" fittings
- Analyzing What Went Wrong?
- Vacuum!!
- mainline sizzing
- Hydrofracing Maples.
- Line with no vacuum
- Not getting sap for tap ratio ?? Is it tubing? Age of taps? Mystery !!
- 5 diffent tap diffent dry hole times
- Clean up time
- Advice needed on mainline purchase
- Doesn't FW WEBB soon have a tubing sale?
- Leaking saddles
- How far apart
- What size black pipe for transferring sap?
- tubing installed wrong
- Pulling taps and washing tubing with the new check valves?
- When to tap
- Pull & Rinse
- Anyone know what they are paying per pound this year yet?
- Maple tubing Installation
- First Year With Tubing
- 3/16 tuding tips for next year needed
- Sap ladder step up
- More work is it worth it?
- Sap ladder or cluvert to cross snowmobile trail
- Need 3/16" source, 500' rolls, ss adapters, etc.
- Mainline size for gravity/vacuum
- Connect outflow from gravity to vacuum line?
- Vacuum powered sap piston pump
- New Maple installs
- 1/4" vs. 5/16" Spout under Vacuum
- Laterals on Wet Dry
- Wet Line/Dry Line definition
- long term planning for tubing
- Polycarbonate CVs... Are they seasonal or you can use them for many years?
- pocket sized tubing tool
- Crossing a large ravine with a tubing system...
- size of main line??
- Woods setup
- Might have a new woods!!!!!!!!
- Gallons of sap per tap on 3/16 tubing
- Sap moving from bush to Sugar shack. Would this work???
- High vacuum in gravity tubing installation
- Yields of sap from one tap versus two taps
- Cleaning of tubing systems.
- Reverse slope, submersible pump, suto-start generator
- Summer tubing
- New tubing
- 9 or 12.5 high tensile
- iPhone app
- Comparing 5/16 tubing
- Maine distributors
- Lapiere Mainline Lashing Tool
- Mistake on Wet Line
- 100 psi 160psi 200psi
- Wrap or lag end trees
- Started flagging trees today
- Barbed Ball Valves
- "Oh my word!!" Death tap for sure!
- Hanging Mainline Wire
- Steep ground
- Steve Childs mainline CFM loss data
- How high to tap
- attaching saddle?
- Heavy fall pruning
- How high is high enough
- Intro to tubing clinic
- Multiple sap ladders
- Change spiles yearly???
- Pex for Tubing?
- New bush
- Wet line dry line
- CDL Tubing Quality
- wet line dry line size
- Tightening mainline question
- Way to Tighten Wire
- Tees with plug or caps
- First time running tube
- Lateral Line
- Can a mainline be to long?
- Tube to pail system
- Main line stretching
- Clinometer APP
- Price per tap
- Mainline tubing dispenser
- Hobby Sized Tubing System Guidance / Suggestions
- Looping Drop Lines
- Tapping saplings?
- North vs South Facing Woodlots?
- mainline slope to releaser
- Research Survey on Tubing Cleaning
- What size taps
- tubing spooler
- Beginner tubing questions...