- Back with another question, shurflo 4008 on flat sugarbush
- 3/16 vs Ladder
- Mainline Tension
- 3/16 Tubing - Trees near Collection Line - no mechanical vacuum
- 3/16 tubing... Love it and hate it
- 3/16 to 5/16 no connector needed in bind
- Taps/ buckets?
- Tips for dealing with shavings in 3/16 line?
- Tubing VS individual buckets.
- Dry line questions
- Zap Bac!
- CV question
- another day, another 3/16" tubing question (for a crazy short run)
- Making drops
- Main line questions.
- Best tubing setup for roadsides?
- 5/16 tubing with low spot
- Basic Tubing Questions
- What tubing type to use?
- 3/16 tubing.... Can I have a 10+ foot drop line?
- are numbers good?
- Does tubing freeze????
- How many years of use?
- In Line Check Valve
- How many taps/run 3/16
- 1% mainline slope
- Any homemade sap ladder/lifter ideas?
- How Many taps for different size mainlines?
- What to do when you hit brown wood?
- 3/16" As Gravity
- Warm weather - wait another week?
- Sap not moving in 3/16 tubing
- New drop installing
- Drop line hot water method
- CV spouts and 5/16 drops on 3/16 natural vac
- Tapping height
- 3 drops into one bucket, Y or Y not?
- tapping distance
- Tightening Saddle Screws
- Crossing snomobile trai
- Y-connection question
- Connecting a stainless 1" wye?
- Tubing question
- Mainline drilling. no tool. Help Please
- 3/16 on gravity. Sap Output and sag.
- Brunswick Stew!
- Lateral into Wet/Dry
- 1/4" spouts
- 3/16 question
- Interesting clog on 3/16
- Y gravity drains and venting containers
- DO NOT PULL TOo Tight
- Rainwater in buckets
- 3/16 help in Northern MN
- Locating leaks and clogs
- 3/16 Vacuum Problem
- Line Cleaning
- leaky saddles
- Converting mainline to wet/dry
- End of season line question
- 5/16 natural vacuume help
- Variable result in 3/16 lines
- New to tubing, this tool is a must have.
- Rethinking and discussing our tapping strategies
- Sureflo + tubing question
- Need help with vac issues on a Shurflo 4008.
- Running tubing across a road
- Has anyone used these to hook 3/16 to a sureflo???
- replacing taps
- Oh boy....BIG MESS
- No more 3/16"- problematic
- (2) 3/16" Drop Lines Into Lateral with "Y" Fitting or (2) "Ts"?
- Pumping from roadside collection tank to haul tank
- 3/16 tubing questions
- Sap ladder air leaks
- I think I made a stupid mistake. Any opinions?
- Lots of trees and limbs to clean up.
- Surflo Intake sizing
- Wet/Dry Line set up
- Is it worth tapping?
- question on a new bush
- Another 3/16 issue
- 3/16 vs 5/16 w/ animal resilience?
- Leader Single Barb 3/16ths Fittings
- The winter that won't quit!
- Shurflo with temp on and off
- Leader 3/16 stubbies popping off
- 3/16 hybrid advice
- 3/16" on mechanical vacuum. Sap not moving..
- Tubing freezing off taps
- Leader clear caps
- Tapping and Tubing in a Swamp
- 3/4 mainlines and shurflo
- Revamping my 3/16 lines to reduce maintenance
- check valve spouts
- 3/16 and vac assistance needed
- Has anybody used Star San to sanitize tubes?
- 3/16 Newbie Questions
- Vacuum Leak
- Steep mountain vac or stay gravity
- Recycling old tubing
- Flat woods small scale tubbing
- Off smelling mainline
- Leader 5/16" Clear Seasonal Spout (LACSP)
- plugged 3/16?
- Looking for tips and advice on a new 3/16" tube system
- new bush set up?
- Help with recurring leaks at 3/16 spouts
- 3/16 and main line !
- Short laterials worth 3/16 ok?
- Posting the results of reaming - LONG
- Tapping Depth Poll
- Stingy trees
- Annual Tubbing Take Down Practices
- check valves separating
- Dry taps pulled, then sap pours out
- Too air tight ? Pressure question help
- 3/16 mainline sizing.
- Odds of budding??
- Mainline Brand Recommendations Needed
- Going under the road!
- Good 3/16 saddle options?
- Leader 3/16 CV Spouts--is the Jury still out?
- Tap size question
- Vacuum gauge?
- Spouts coming off tubing
- Questions on drilling and CV taps
- CDL 3/16 spiles popping out of green T
- 1 1/4 tubing
- DSD Star 225 siles
- Difficult mainline install
- Mainline support post
- Level ground gravity feed tubing
- who's walked their lines in the off season/storm damage
- Tapping under vacuum with dirty lines
- Tapping below lateral lines
- Drop to lateral lines
- Cdl zap bac
- Keeping deer out?
- Sap ladder on gravity?
- 5/16 to Mainline Questions (Newbie)
- Spin seal
- Cam Lock dust caps
- Spile color and sap quantity
- 2 handed tool suggestions
- New spile or used
- How many taps on a 5/16 lateral line?
- Taps in too long
- Red vs. Sugars on same lines?
- sap ladder
- Mainline PSI
- Gravity-fed main line
- 3/16 manifold with shurflo
- Taps per 1/2 pipe
- Questions on running tubing from a newbie
- 3/16
- 3/16 Tubing in gray
- Newbie Tubing Questions
- Hanging pails vs dropline/buckets
- Tapping below lateral line
- What freezes first in a tubing system
- Running tubing in cold weather (winter)
- Fall hanging of 3/16th sapline
- Tee's VS Wye's - Main to Branch Line
- Changing spouts
- Zig - Zagging 3/16 tubing down the hill..
- broken main line wire
- permenant tapping
- Sucking up hill to the mainline
- Rapi-Tube Mainline
- Cleaning tubing
- Drop 30' or use less line.
- Vacuum line size.
- 3/16 #s and thoughts
- Shurflo / how many taps
- Vent the main line or cap it off?
- Which is best sap ladder install, more or less?
- Survey , best tap price, production
- Wet Dry systems on flat ground
- Using Zap Bac spouts
- Does anybody use SS spouts on 3/16 gravity or vacuum setups
- Cleaning 3/16ths lines after the season
- 70 tap install question
- Shurflo - Vacuum Gauge/s?
- Cleaning 3/16 Lines Prior to season
- Is IPA a Registered Sanitizing Solution?
- 5 /16th tubing preference
- What size hole is best for DSD saddles?
- 3/16 laterals into 5/16
- New to tubing and have questions.
- Ice traps for gravity Mainline?
- Shurflo, which switches and relays to use
- "Tying off" stretched 3/16 tubing
- 1 1/4 Wet Dry - max taps question
- Connecting Two 3/16 line.
- Removing and reusing mainline
- Mainline Density?
- Tying together 55 gal drums
- how to run 5/16 laterals on a shurflo system? How much slope??!!
- 3/16 Tools
- 3/16 leak detection
- Saddle leak tips?
- tapping below lateral vs lateral below mainline
- Vacuum Build Time - Shurflo
- The effects of rain on tap holes.
- Tappling 1½" deep this year
- 3/16" fitting caps?
- Drill Bit Size 19/64 vs. 5/16
- Woodpecker problem
- What's the lesser of evils?
- washing spout adapters
- Input on design of 3/16 and 5/6 lines
- Sterilize while tapping
- Connecting 3/16" tubing and fittings without tools
- Has anyone used a Precision Tapper
- Drilling problem
- how much air should be in 3/16 line?
- Gravity Mainline Installation Q's
- how many taps per mainline
- I ran out!
- Do I really need a 3/16" tool??
- Pre-testing new tubing lines
- Only one thing i hate more than squirrels
- Clear taps
- Help To Identify Required Tools and how to use
- Squirrels
- Sap going up drop line - why?
- 3/16 tubing - why not replace lines every year?
- 5/16" / 3/16" Hybrid System
- Line Filling Up, then Stopping
- Snake sap ladder
- 3/16 natural vacuum spots
- 3/16 natural vacuum SPOUTS
- Not even a little bit fun this year!
- 5/16" blue ( Canada made) plastic taps question
- Problem solving: pressure in the lines
- Tree Gas or Leak?
- Equalizing vacuum lines
- How Much Lift Can be Achieved with A Gravity/Shurflo Hybrid System?
- 3/16" Blocked
- Spiles leaking
- 5/16 tubing with shurflo
- Hints for doing repairs out in bush?
- 3/16 for first time
- My first tubing setup based upon advice from the guy at the shop. Is it right?
- Cleaning 5/16” taps
- Best viable options for 3/16
- 3/16" vacuum question
- Drop Size on 3/16" tubing
- Mainline frozen with slush