- Quick Disconnect on Mainlines
- 5/16" Tubing OD
- 5/16 drops vs 3/16 drops to 3/16 laterals
- using 5/16 as a main line
- Tapping Temperature
- Gray tubing color - in 5/16
- Minimum length of drops
- Tubing tension recomendations?
- walnut tapping
- Food safe PVC tubing
- 3/16 tubing with a y?
- Clean brand new tubing?
- Need Opinion on Tapping Big Old Trees Previously Tapped by Others
- Is there an easy way to put on DS saddles?
- LOAC Replacement Blade
- Insects affecting maple trees
- Vacuum "boosters"
- 3/16 split droplines
- Simple tool for signature spouts
- Cleaning tubing Mid Season
- Tapping Sanitation
- re-using taps on Lines
- Installed Spin Seal Fittings Today on New Mainline
- What a great tool LINEVIPER!
- Tapping in early January in NE Ohio.
- 36" drops question.
- Tapping into dark wood...
- Tubing into Buckets
- Tubing into Buckets
- 2 Taps 1 Bag
- Are loops in 3/16 drops bad?
- Computer power supply won't work in the cold
- How consistently downhill does 3/16 tubing have to be?
- 3/16 tubing sap collection vent?
- How long does a sap run last?
- 5/16 tubing question
- Contaminating new taps
- Drops
- Tee question
- Our first yr. Bought someone out. Tubing Q's.
- Increased natural vacuum on 5/16 gravity
- Will this find vacuum leaks?
- 3\16 gravity trouble
- 3\16 gravity trouble
- Are Taps too Low??
- how many seasons for 3/16 tubing
- Why not 1/4” Leader Check Valves?
- Burying mainline
- Ice hates my Sap Guzzlers - need help
- sap flow dynamics
- Sap guzzler set ups
- Vacuum systems and warm weather
- Squirrel chews
- H2O2 sterilization
- tubing faling in hot weather.
- CV Tap Removal - Uh Oh...
- Cleaning 3/16 lines at the end of the season
- Replacing taps
- Vaccum pump size....... Help!
- I submit my neighbor for the Most-Sap-Per-Tap award.
- Backpack cleaning kit with harness and dozer & isporpoyl alcohol
- Shurflo diaphragm pump vaccum
- Shurflo end of season clean ?
- Top line size
- Better to run longer 3/16 or connect to mainline?
- Never ran tubing...Where do I even begin?
- Stainless steel tubing spiles?
- Polycarbonate vs. nylon spiles
- Updated Tubing Size CFM Guidelines
- Using sap ladder with Guzzler double diaphragm vacuum pump
- Isoprophyl alcohol
- Tees
- Lapierre lifters
- Wire Twisters
- Looking at cv spouts
- What is he doing wrong?
- Green Tubing
- When do you put out your lines?
- Any suggestions for an inexpensive sap collector tank at the end of a line?
- Generator/ new tubbing woods???
- Best Resource to Properly Install 3/16" Gravity System?
- Vacuum booster vs. tubing
- Mainline support posts
- vacuum for sap ladder
- How to run many 5/16 in an IBC tote?
- Removing taps left in from previous season.
- Brand new to tubbing, help!
- New Tubing install
- My first 3/16 tubing run!
- Long 3/16” taps lines vs sap collection with laterals/mains (both natural vacuum)
- Lateral lines on 3/16 ? Ok or not?
- How much peroxide to mix with water
- 3/16 sanitation solutions
- 3/16 Tube Availability
- COVID-19 pricing/ gouging
- 3/16 scrap length
- Tubing install, low slope and no power
- Mainline connector
- Using a 12 volt water pump (RV style)
- 3/16 tubing availability
- Cleaning sap lines
- The Onset
- What are you using for a tapping drill?
- 3/16" gravity
- Mainline on a side hill
- Wildlife Damage??
- Taps and drops.
- Lateral line tensioning at end of run
- wet dry line vacuum source
- 40" Drops to buckets.
- One more drop question.
- Taps/tees/tubing cleaning
- 3 5/16 tensioning hooks and rope to tighten tubing when splicing or repairing.
- 3/16 20 ' drop in 650 feet. will it still work
- Mainline differences
- 5/16 distorted/deformed while stretching
- Poly tubing vs maple tubing
- Tapping pattern
- 3/16" line supports?
- Anyone clean year prior taps
- winter storm
- Lineviper vs One Handed Tubing Tool
- Help troubleshooting 3/16 gravity line
- troubleshooting 3/16 gravity
- What is your favorite 5/16" tapping bit
- 3/16 on shurflo vacuum max taps per line
- Check Valves w/stubys on Shurflow vac
- Mainline Side Ties
- 3/16 and Check Valve Taps on new drops
- Cleaning 5/16 lines
- air lock in drop/tap?
- Food coloring to check for vacuum leaks … crazy idea?
- Reseting CVs After a Freeze
- How to Carry 18V Drill?
- How many taps on 5/16" for natural vacuum
- End of line technique to minimize impact of "chews"
- combining 3/16 and 5/16
- Vacuum Leak Finder
- Pulsating Sap Flow
- Best 5/16" Tapping Bit & Source
- 3/16 end of the line normal tee ok to use?
- H2o Spouts
- Brachistochrone curve effects on 3/16” gravity?
- Cleaning 3/16 lines on vac
- Maximum flow per tap
- Running longer laterals or mainline?
- CDL SpinSeal usage on different MFG Mainline Tubing
- Quick Release Drops
- De-Tapping Question
- Installing a mainline 20’ high
- Leaving peroxide solution in lines?
- IDing Tap Holes
- 3/16 is one brand better?
- RO soap to clean 3/16 system
- Pre lashed mainline
- Vacuum loss from mechanical releaser
- Offseason Expansion PLans - Input appreciated
- Re-Use of Sap Saks (blue) Bags
- lapierre spouts
- what is the better option 5/16 or 3/16??
- Sap yields 2022 on different parts of sugarbush
- Book on Vacuum installation?
- Need help - tubing system for my sugarbush
- Need help - tubing system for my sugarbush
- CV versus 5/16 drops on gravity system
- tubing system revamp
- UVM Spout and fittings
- did CDL change formula of 3/16 tubing?
- Tubing layout question for 3/16 sap-only farm
- Shurflo 5059 capabilities
- Tapping a little early
- Order of events in sanitation of 3/16" lines
- 12v Deep cell battery recommendations
- How high is too high to tap a tree on lines?
- Pre-Made Complete Drops - Where to find?
- 3/16" or 5/16" Laterals on Vacuum
- Tubing Protectors
- Foam "Pig" to clean Main Line
- Opinions on (small) 3/16 to mainline setup.
- Check Valve Spouts on Buckets?
- Repair wires
- Question about shurflo 3/16 setup
- Max taps for 3/4" wet line
- Plugging a Lateral for 1 Season
- Leader 3/16 to 5/16 fitting
- 3/16 Runout
- 3/16" line into bucket question.
- Spout sanitation
- Pre-made drops
- Quick fix for line leak?
- frosting mainline leak
- Excellent walkthrough of full tubing system install and maintenance
- What should the sap in the line look like?
- Wet/dry and sap ladder
- Pumping within a vacuum
- Pretty new to tubing - why did trees on my 1 line "dry up?"
- Ok for collection point to be uphill with shurflow vacuum?
- Check Valve Adapters Breaking
- Leave the vacuum On?
- Mainline saddle hole size? 7/16 vs 5/16
- 3/16" line disconnects for tractor paths
- Junk in the Lines - End of season
- Installing mainline y’s
- Natural Vacuum
- Cleaning my 3/16 lines with One-Step
- Can we call that tapping ???
- Preparing to tear down and reuse lines next year
- Flat mainline run on shurflo, help designing please.
- Can I lift sap without a mainline?
- Tapping a long row of trees sloping away from the road
- isopropyl alcohol
- 3/16” on natural vacuum - how many taps is too many?
- Endline Tee's
- Lunch box releaser users: Question
- Stainless Spiles
- 3/16" drops vs 5/16" drops
- tapping below the lateral
- Special "health spouts"?
- Favorite mainline manifold
- Mainline and tubing
- Looking for Designer for New Vacuum System for 400 - 500 Taps
- first time using tubing
- Lifting multiple mains
- tubing phone app?
- 3/4" mainline support
- drops and quick connects
- Carrying drop lines in the woods
- Drop replacement
- 5/16 on Shurflo again
- shurflo 4048 vacuum
- CV Spouts - Still Preferred?
- Tapping Early and Vacuum Turned On
- 3D Printed Sap Tubing Clips
- Design for 100-150 taps with little slope
- Mainline question
- Surrendering to the fur covered demons
- Dsd Stars 1/4” taps
- Understanding Mold Growth in Tubing
- Stainless spouts with a stubby
- NH Tubing Install
- Checking check valve spouts
- New ARC taps vs CV taps