- Another 3/16" Question
- Black or blue main line , does it matter
- Gameplan for first tubing
- 3/16 leader tubing
- Main line wire tying
- Burying Line
- 39 taps per acre
- Tees or y's better on 3/4 main line
- 3/16 tubing and vacuum factors
- 3/16 Newbie venting
- Distribution reel for 3/16 tubing
- 3/16 drop replacement
- running mainline over a beaver pond?
- Mainline Tubing Tool
- Burying a pump station line
- tapping below lateral line
- 3/16 drop line length and achieving vacuum on plateaued sugarbush
- marking holes
- Spout and Health T Cleaning / Replacement
- Cleaning 3/16 Tubing
- 36" drops - Is it ok to have a U or curve in the drop?
- Cleaning 3/16 line and spouts
- DSD saddles
- Temperature when tapping vs. splits on tree
- Stainless barbed fittings?
- 1/2 and 3/4 cam lock fittinggs
- Isolating non-producing tree from tubing system
- 90 degree elbow mainline
- Should I tap?
- Sap ladder or more slope?
- CTS poly fittings for mainline
- Dumb Question...
- attaching 3/16" tubing to the tree
- Sap stars
- What taps and tubing to get?
- Would I lose vacuum?
- Spile/Tap Sanitation
- How much "uphill" can I get away with with 3/16 tubing?
- sap lifting
- Taping do it or hold on
- DIY tool
- Surflow question
- Main line capacity
- 6 way star spacing for sap ladder
- Replacing 3/16 Drop Line
- Installing 5/16" tubing
- How tight to pull 3/16
- Looks like tree really grew this year could be a good sap year
- fusion tape
- Tapping Red Maples near water
- Tips for Tubing Rookie?
- Packing up
- Check Valve Spout Drop Lines
- Draining 3/16 Collection Tank
- Simple Way To Hold Tubing
- Is This A Maple, Or Something Else?
- 5/16 drops on 3/16 system
- Leaky Taps
- New Super Easy Saddle
- Ghetto tubbing tool
- Sap Transfer Tubing
- Max Length of 3/16 Natural Vacuum
- 5/16 into 3/16
- Leader check valve adapters
- Slope for Mainline Transfer
- Antimicrobial Adapters
- New to tubing, what to buy?
- 3/16 or 5/16 drops?
- Assembling Drop spouts in the kitchen with PEX pipe
- Tubing Reel
- MainLine Ends
- Collection point question
- New Guy, recommendations for type of tubing and fittings
- 3/16 Natural Vacuum Questions for Layout
- 3/16th vacuum gauge installation pics
- Test Drops
- Main line cleaning
- mold in a few drops
- clear check valve installation
- Rigid or Semi Rigid
- Sap lifter on a dual line setup
- 3/16 dropline question
- Newbie shurflo, tubing question
- Soft maples that budded early
- How many taps can you put on 5/16 without mainline.
- Rapi-tube
- No slope sufflow
- stretching leader 30p
- Better Of Two Scenerios
- Drill bits
- A new tubing tool -CORDLESS!
- Ys vs. Ts at the end of the drops
- Woodpecker or bug?
- No vacuum needed!!
- Removing Tubing from fittings?
- 3/16 vacuum question
- D&G Blue Mainline?
- New Guy
- Black flakes in sap
- Attaching vacuum gauge
- How nasty can things get inside a 3/16 line?
- What type of drill
- sap refrtometer
- sap refractometer
- Sagging tubing
- using a 3/16 connector on a long drop to gathering- how ristricting?
- 3/16 tubing system install
- Brown Wood
- Long warm spell and mold concerns
- Old Sugar Trees
- 3/16 Vacuum question
- Clear check valves question
- 3/16 gravity vacuum question
- Shurflow 5/16 or 3/16
- Rain
- newbie to running a vaccuum line?
- Automotive vacuum tester?
- How do you get the spout out of the tree?
- Drop line tool
- Good 3/16 primer article?
- Price per tap
- Not Much Sap
- Maybe I have a silly question
- Tubing runs on level ground
- Tubing on the ground
- Best Semi Rigid Tubing for the buck?
- Old Tubing - Guess Its Age
- Was going to run vacuum, now may not
- New plastic Taps...Leaking and catching very little
- Backward Bubbles
- Information on 3/16"
- Pump thoughts
- Length of drops for 3/16"
- 3/16 with mechanical vacuum
- 3/16 vs 5/16 on vacuum
- Tension hooks
- 3/16th to main line question
- 3/16 line with shurflo?
- How many is too many?
- Check valve question
- Maiden voyage on 3/16"
- long drops?
- Re Tap Trees with dried up tap holes?
- Where's the sap?
- Keeping count.
- Is there a easy way to tell if a 3/16 line is filled with sap or filled with void?
- Tubing unwinder for 3/16"
- Need help on correct size of tubing and pump
- Cleaning gravity sap lines
- Pulling and plugging budded drops from 3/16 lateral without losing vacuum
- 3/16 Jump starter
- vacuum gauges
- Mainline saddles
- Leader 30P
- Extended 3/16" line
- Tapping tree after couple years
- 3/16 question
- Atmospheric pressure and sap flow.
- 3/16" Cleaning
- 3/16 Vacuum Mainline Pooling
- Max length of a 3/16 lateral
- 5/16 dryline vacuum loss
- How to remove and replace 3/16 on a seasonal basis
- How to clean 5/16 check valve spouts
- Wife doesn't like the "look" of tubing
- Hydrogen Peroxide Cleaning Solution Information and method?
- 3/16 rigid vs semi for laterals
- 3/16 laterals on wet/dry mainline
- Help designing a 3/16 hybrid system
- When to remove CV spouts
- Lags vs wrapping end tree for mainlines
- help in troubleshooting 3/16 line for next season
- 3/16 to mainline vacuum?
- Not Very Cool
- Designing 3500 tap tubing system.
- New leader clear check valve adapters
- Reds or Sugars.
- Flushing Nozzle
- 3/16 or 5/16 on vacuum?
- how to deal with long flat level bush....???
- Consistent Slope
- Check valves sprouts and bags
- Using Nylon Ratchet Straps in the sugarbush
- recycling tubing
- Antique Cast Iron Spile
- Number of Taps for 3/16 Gravity
- Dsd stars maple equipment
- Retapping Reaearch Results 2017
- Sap ladder vs. ice
- Black spots and Hydrogen Peroxide
- Tubbing layout
- 12 Volt Sap Relay - Crazy-Azz Idea?
- Favorite 3/16th's tubing
- Mainline Question
- Sizing for a small pump
- CDL stubby with check valve adapters
- Pump line question
- New to tubing with some questions
- Rules of the roads and powerlines?
- Sap Flow Issues - Need Advice! (With Picture)
- Wet dry system
- LOAC tool mod for 3/16
- Trail crossing disconnect
- number of taps on 3/16 with steep slope
- changing drops
- CV spouts or CV spout adapters?
- Tubing Seminar and Open House
- Installation cost.
- 1000' 5/16 lateral?
- Sliding adaptors comming loose
- Home Made Tools
- 5/16 or 3/16 as main
- Pumping up hill
- Tapping below branch lines with vacuum system
- Dewalt 20v drills for tapping
- Best Time To Do Repairs?
- Yet another 3/16 thread
- Woodpeckers
- Squirrel Chews
- 3/16 single barb??
- 3/16" Two hand tubing tool.
- Tapping trees that have wind damage
- Working in the bush - Safe wind speeds
- What app do you use to map your tubing installation
- Backyard Tubing System
- Elevation, sap backup during freezing, and the use of check valves.
- 3/16" Check valves and spouts
- Reds and 3/16 tubing
- Setting up a flat sugar bush for vacuum.
- Mainline Anchoring
- Tubing newbie - L-shaped 3/16 run
- Teeing into 3/16 Tubing
- CV Spouts improve Sugar content later in season?
- So why not boil/clean/sterilize adapters and reuse them?
- 3/16 drop line taps
- 3/16 spouts
- Options for Removable Black 1" Mainline Without Wire Support?
- logging and a sugar bush
- 7/16 spouts on buckets
- Very basic, 3/16 and I know its probably been posted before.
- 3/16 Vaccum Check
- What kind of tees are best to use with stubbies? Pins or cups?
- Tubing apron
- What to do with sap in 3/16 line that will not run?
- Woods Rats -Learning why ya'll hate em
- 2,000 rpm drill
- Beginner looking for tubing advice.
- Beginner tubing question about multiple taps
- Mainline questions, wet/dry advantages?
- Tap Viability over time using 3/16 gravity vacuum