I took the metal pieces to the welder and he welded it all up as I waited. The light was failing, but I tried the grate “stand” in the fire box and then added the new grate. I was very pleased.

In the first picture, it is an overhead look at the firebox, showing the stand and the concrete shelf at the back of the firebox.

The second picture shows the grate in place, fitting perfectly how I wanted.

The third picture shows the 4” opening below the grate. The width of the opening is not what it will be when it is operating, it is narrow for winter storage mode.

https://share.icloud.com/photos/0a5p...46iTxfxLGDnIFw

https://share.icloud.com/photos/0969...L9HiGgGKdjUmvQ

https://share.icloud.com/photos/0a6t...7PgkgNSmhUJpWQ

E2FD4CA4-2751-41C8-B597-79FEAB64420E.jpg

F2B533DD-59B6-4592-B1C3-0799104BD4A6.jpg

BB631C2D-71CA-4D2D-B10D-E596C9AFB843.jpg