Being ready early might be a plus. The Accuweather extended forecast looks real good for Feb 1st in NW PA. Check it out. Might be able to start 2 weeks early.
Jim
Being ready early might be a plus. The Accuweather extended forecast looks real good for Feb 1st in NW PA. Check it out. Might be able to start 2 weeks early.
Jim
12 x 16 Sugarhouse, 12 x 16 Woodshed
2 x 8 “The Mutt” Evaporator with Marcland Drawoff
Leader oil fired arch, Dallaire raised flue, Smoky Lake syrup pan and hoods with pre-heater
New Leader Clear Filter Press/Air Diaphragm Pump
5” Hand Pump Filter Press from Daryl-One of the first three! On loan to a friend.
Deer Run 250 gal/hr RO
A Very Understanding Wife
"At any time during the day you're only 10 seconds from disaster!"
Did the price go down on tubing in '08?
Mark send me a pm on who to go to. I'm gonna use up the tubing I just bought first then look for more if I got time. Main thing is to get the old system 100% to the road and on electricity. Then worry about adding more taps as I go.
I can't say I've seen Leader (or Lamb) tubing in Ontario which explains why I have no idea what you're saying when someone mentions 30P! The big 3 are Dominion & Grimm, Lapierre and CDL. We paid just under $60 per roll for our 4-seasons and that was a deal because we ordered 30 rolls! D&G doesn't list prices on their website or in their catalogues anymore but Atkinson's has it listed for $71.75 / 500' if you buy less than 10 rolls. The $CDN vs $USA argument is out the window now that they're pretty much equal. Sounds like we're getting the shaft...
5,000 Taps on vacuum
9,400 gallons storage
3 tower CDL RO
3.5'x14' Lapierre Force 5
10" CDL Wesfab Filter Press
Twitter & Instagram: @ennismaple
www.ennismaple.com
our family has probably close to 70,000taps (Four Camps) all 30p we pay 50.00 a roll and buy it by the pallet (50 rolls) there’s is a lot of lamb tubing in my part of New Brunswick but I would have to agree its mostly ipl and DG (CDL and Lapieree use ILP) I was talking to the Lappieree dealer the other day you can get 4 season for 62.00 that’s only up 4.00 bucks from last year but still I agree that prices are sky rocketing but I think with the price of oil dropping we may see the plastic price drop. Has leader put there price up on 30p? I haven't talked to anyone down there in a couple of months.
shurken from 8500 to 2500 slowly growing hope to have 5000 this season 5x16 Lighting and a lot of fire wood
Guys no prices listed anywhere for tubing. I ordered tubing on the 8th of jan at 1 price and 5 days later order the same thing went up $4.00. That is the pitts!! Even if you look in the new books when you call up the prices are not what you saw.
Richard
I am a 3rd generation maple producer, with 80,000 taps & 28 sugar bushes.
2 evaportors, 6x16 & 5x16 Water/Loo Small Turbos
2 ROs, 1 2400 gph & 1 1800 gph
2 10" filter press full banks
Sap Tanks rangeing from 600 to 6000 g
(Hired Boys says "All numbers subject to change" Ha Ha)
I like the Lappierre tubing and it is all $ 60+ per roll on the maple guys website. It was close to $ 40 aprox 2 years ago.
Brandon
CDL dealer for All of West Virginia & Virginia
3x10 CDL Deluxe oil fired
Kubota M7040 4x4 Tractor w/ 1153 Loader hauling sap
2,400+ taps on 3/16 CDL natural vacuum on 9 properties
24x56 sugarhouse
CDL 1,000 2 post RO
WEBSITE: http://danielsmaple.com
well i was out in the bush for 4 hours today and put up the last of the main line for this year just need to finish the 5/16 line and put up more taps we are at 303 right know but i recently bought a skid of 5/16 tubing 1800' and 500' of 3/4 and 1/2 mainline and 350 droplines 30 in -60 in long all for $50 but i got to get as much taps out a possible
finished hanging mainline today, got 3 sap ladders built. hi temp today 20 last night 0. 25 days to go
RICH
As of today...All of my sugarbushes have been inspected and repaired. Ready to tap and just waiting for the right air. Fired up big Bertha today. Had alittle trouble getting her to start, but by afternoon the steam was chuggin' out the stascks. What a pretty site! R.Os are flushed washed and ready. OK "Mother Nature" lets roll!!!
I am a 3rd generation maple producer, with 80,000 taps & 28 sugar bushes.
2 evaportors, 6x16 & 5x16 Water/Loo Small Turbos
2 ROs, 1 2400 gph & 1 1800 gph
2 10" filter press full banks
Sap Tanks rangeing from 600 to 6000 g
(Hired Boys says "All numbers subject to change" Ha Ha)
Sugarmaster,
When do you plan on tapping.?