+ Reply to Thread

Thread: Checking what VT sugar makers are doing

  1. #1551
    Join Date
    Sep 2010
    Location
    Vermont
    Posts
    2,248

    Default

    Quote Originally Posted by tcross View Post
    I just started putting my sugarhouse back together. used it as a lumber mill/storage as I was building my addition/house this summer. got in the woods yesterday afternoon for a few hours... lots of limbs down. I have a few more hours of work there.
    Spud, if your steroid injections worked as well as mine did you'll be back to normal soon. I had to do two sessions because I had 2 discs that were totally herniated. it worked well the first time but was still struggling. a week after the second one, I was back to 100%. good luck with it! one hard thing I learned from it was to not keep on doing things with the same muscles every time... like swing the axe with the left hand dominate, then the next with the right! having a bad back is not fun at all!
    tcross thanks for the info. I will be going back for round two in 4 weeks. I hope my injections help as much as yours did. I have already had two disks taking out and had a double fusion surgery. The disk above the fusion is almost gone now. If I was a horse they would have shot me by now. Best of luck in the 2017 season.

    We have a few people in town making syrup now. One neighbor made 8 barrels yesterday. It looks like those who are tapped in will be getting lots of sap by the end of next week. Unfortunately I will miss out on this warm spell but hope to be up and running by the end of the month when everything goes back into deep freeze. Westfordsugarworks I think your in for a ton of sap in the next ten day. Your numbers last year were very impressive and I look forward to seeing how you do this year. Best of luck to you and all Traders this season.

    Spud

  2. #1552
    Join Date
    Feb 2015
    Location
    Westford, Vermont
    Posts
    238

    Default

    Spud, good luck with your back. It must be really hard having all the sugarwoods to manage but having constant pain when trying to get things done. Yeah, looks like we will have a lot of sap. We weren't anticipating so much these last couple days so we didn't get the RO out of it's winter storage, but we should have. I'm really optimistic that our Westford bush will have high numbers and we should do ok in Jericho too, especially if we can get a bunch of trees drilled before Tuesday. Good luck to all!

  3. #1553
    Join Date
    Mar 2011
    Location
    Central Vt
    Posts
    402

    Question

    So from the forecast this week is looking awfully sugaring season here in Central VT, anyone tapping in this early on buckets ? I am debating it, but not sure if the taps I do now will last the entire season into April... Thoughts ? Thinking of tapping some reds as I think they will run sooner ?

    So not ready on the arch/shack... but I never am
    31 Taps in 2011 with buckets, Barrel evap
    45+ Taps for 2012 with buckets, 2x5 Dryer Arch with steel pans ! 8x11 Sugar Shack, Dump Stations,
    60 Taps for 2013- Insulated Dryer arch, AUF,
    2014 watched from sidelines...
    70 Taps for 2015 - dryer arch, new 2x5 divided pan from Smokey Lake with a float box !
    70 Taps for 2016 - added a preheater and new grates for the Dryerator.
    80 Taps for 2018 - Dryer arch got new front and door

  4. #1554
    Join Date
    Apr 2009
    Location
    Bristol, VT
    Posts
    1,978

    Default

    This year I'm joining the ranks of the early tappers. Started yesterday after spending a bunch of time this fall improving some areas where I had more taps/lateral than is ideal, and after changing out many drops. I had quite a bit of blowdown this year and some other major repairs to do as well. I'm hoping to take advantage of the lack of snow and warm days over the next week to get a bunch tapped. Still have a bunch of drops to replace but I think I can meet my goal of being 100% tapped and ready in the woods by the time we start getting consistent sap.

    Not much to do in the sugarhouse to get ready except for a minor ceramic blanket repair in the arch, and rinse the ro. Hoping for no major equipment issues.....
    About 750 taps on High Vac.
    2.5 x 8 Intens-O-Fire
    Airtech 3 hp LR Pump
    Springtech Elite 500 RO
    14 x 24 Timber Frame SugarHouse
    16 x 22 Sap Shed w/ 1500 gal. + 700 gal. tanks
    www.littlehogbackfarm.com

  5. #1555
    Join Date
    Sep 2010
    Location
    Vermont
    Posts
    2,248

    Default

    General I think you are making a wise choice. I think your going to be making syrup by the end of the week. The 10 forecast in my area has dropped a bit and there may not be a bunch of syrup made in the next 2 weeks but in your area i think it's going to be good. Please keep us posted as to how many gallons you make.

    Spud

  6. #1556
    Join Date
    Apr 2009
    Location
    Bristol, VT
    Posts
    1,978

    Default

    Sap has been running a little bit on gravity....just rinsing lines at this point. Hoping to hit 400 taps in today and then turning on the vac. pump. Forecast for next week is trending colder so not sure how much syrup will be made but I'll take it.
    About 750 taps on High Vac.
    2.5 x 8 Intens-O-Fire
    Airtech 3 hp LR Pump
    Springtech Elite 500 RO
    14 x 24 Timber Frame SugarHouse
    16 x 22 Sap Shed w/ 1500 gal. + 700 gal. tanks
    www.littlehogbackfarm.com

  7. #1557
    Join Date
    Apr 2009
    Location
    Bristol, VT
    Posts
    1,978

    Default

    I went to turn on the vac. pump on Friday evening after getting over 400 taps in last week and the pump was siezed. It has stuck in the past due to mineral scale build up (liquid ring pump with water for cooling), but never this bad. Spoke to a CDL tech and today had a chance to take it apart and get the impeller moving. No big deal and now it is pulling 27" after fixing a few leaks. Sap is running a bit....but nothing too impressive. Not sure what this week will bring but I'll leave the pump on until it freezes up again.
    About 750 taps on High Vac.
    2.5 x 8 Intens-O-Fire
    Airtech 3 hp LR Pump
    Springtech Elite 500 RO
    14 x 24 Timber Frame SugarHouse
    16 x 22 Sap Shed w/ 1500 gal. + 700 gal. tanks
    www.littlehogbackfarm.com

  8. #1558
    Join Date
    Apr 2011
    Location
    Poultney,Vermont
    Posts
    82

    Default

    Quote Originally Posted by GeneralStark View Post
    I went to turn on the vac. pump on Friday evening after getting over 400 taps in last week and the pump was siezed. It has stuck in the past due to mineral scale build up (liquid ring pump with water for cooling), but never this bad. Spoke to a CDL tech and today had a chance to take it apart and get the impeller moving. No big deal and now it is pulling 27" after fixing a few leaks. Sap is running a bit....but nothing too impressive. Not sure what this week will bring but I'll leave the pump on until it freezes up again.
    I put glycol in my water cooled pump to store it. That was what Cdl told me to do. Haven't had a problem with it seized up. Maybe this will help

  9. #1559
    Join Date
    Mar 2009
    Location
    ANDOVER, VT
    Posts
    766

    Default

    I got a feeling cold weather is coming again, long range looked cold for a few weeks. Hope there wrong like it usually is.
    vacuum
    RO
    filter press
    auto draw
    New leader oil fired


    http://s712.photobucket.com/albums/ww123/jtrap/

  10. #1560
    Join Date
    Feb 2015
    Location
    Westford, Vermont
    Posts
    238

    Default

    about 1000 taps away from being all done tapping. Will be happy to have a few weeks of cold to fix the long list of things that we've noticed while tapping and just relax for a few days. We've been pretty much flat out. So grateful for people that come to help us. Made 60 gallons on Sunday and the guy we sell our sap to hauled away about 17,000 gals of sap from our big bush. Good luck to all.

+ Reply to Thread
Page 156 of 375 FirstFirst ... 56106136146147148149150151152153154155156157158159160161162163164165166176206256 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts