+ Reply to Thread

Thread: Checking what VT sugar makers are doing

  1. #1471
    Join Date
    Nov 2013
    Location
    Hinesburg, VT
    Posts
    112

    Default

    It's 50 degrees in hinesburg, still basically just a trickle. I'm in the banana belt so I would expect to thaw a little earlier than most.

    The sap was running harder than this right up until it froze Saturday night - it's like they are still too frozen do do anything. I don't think my taps were showing signs of drying up before it froze Saturday night. I didn't get a chance to walk my woods this morning but I will later this afternoon if things still haven't picked up.

    The taps are all CV2 spouts on 2-year old tubing... I ran my pump right up until the freeze saturday so sap wasn't just sitting around in the lines very long - maybe the taps have dried up, but if they have it's not for lack of trying on my part. I'll monitor it more throughout the day.

    Is it running for anyone else?
    --
    2015 - 110 taps on hybrid pump + 3/16 natural vac
    - releaser posts every release event on twitter: https://twitter.com/ryebryesreleasr
    2014 - 30 taps on 3/16 gravity

  2. #1472
    Join Date
    Apr 2009
    Location
    Bristol, VT
    Posts
    1,978

    Default

    I haven't pulled my taps yet and at the moment it is running quite well just on gravity. I would not want to try boiling the sap, but it is running...
    About 750 taps on High Vac.
    2.5 x 8 Intens-O-Fire
    Airtech 3 hp LR Pump
    Springtech Elite 500 RO
    14 x 24 Timber Frame SugarHouse
    16 x 22 Sap Shed w/ 1500 gal. + 700 gal. tanks
    www.littlehogbackfarm.com

  3. #1473
    Join Date
    Nov 2010
    Location
    Barnet, VT
    Posts
    2,580

    Default

    58 here in Barnet. Mine are only at a trickle. I think it is just from the 4 day freeze.
    William
    950 taps
    3 X 12 Thor pans on a Brian Arch
    CDL 600 expandable

  4. #1474
    Join Date
    Apr 2015
    Location
    Bakersfield, VT
    Posts
    47

    Default

    It has picked up here. I dumped the few hundred gallons I got yesterday and this morning, but now It's running clearer so I've closed the valves. Testing 1.7, no smell. I cleaned the releaser and our single booster yesterday early morning and that did smell, it was not fun. Good luck all!
    4700 hundred taps
    7.5 hp Airtech Liquid
    2- 1.5 hp CDL electric releasers

  5. #1475
    Join Date
    Mar 2013
    Location
    Readsboro, VT
    Posts
    335

    Default

    Quote Originally Posted by GiddingsHill View Post
    It has picked up here. I dumped the few hundred gallons I got yesterday and this morning, but now It's running clearer so I've closed the valves. Testing 1.7, no smell. I cleaned the releaser and our single booster yesterday early morning and that did smell, it was not fun. Good luck all!
    Similar situation here. I opened my releaser and cleaned during the cold spell. It was quite bad. My sap did not run at all yesterday, and through the night, and only started late morning when temperature reached 47. First sap was quite cloudy, but running much clearer, and with moderate flow now at 1.4%. I switched tanks, and will probably dump the 75 gallons of cloudy sap, which was a line flush I think.
    Eric of the Greens... I Fly Solo...
    2013-15 Block arch to having it all...
    2016...320 on vacuum. 155 gravity, 90 buckets.
    All homemade equipment except Smokey Lake pans.
    2x6 arch, Electric releaser w/ Gast 1023 24" vacuum
    2x4x40 RO w/ dual 265gph Procons
    My PWS with webcam... https://www.wunderground.com/persona...READS2#history

  6. #1476
    Join Date
    Nov 2013
    Location
    Hinesburg, VT
    Posts
    112

    Default

    It's starting to pick up a bit in Hinesburg - It was about 3 hours to the first time my releaser dumped, then 45 minutes, then 30 minutes, most recent one was 25 minutes... When it runs really hard it will dump about every 2 minutes - so the flow rate is about 20 times less than max flow rate, but it's ramping up.

    (If anyone cares about seeing how the sap is running in hinesburg, I have my releaser posting messages on twitter so I can watch it from work - https://twitter.com/ryebryesreleasr the couple things that happened earlier this morning before the 3 hour delay were me cleaning it out and testing it before leaving it for the day)
    --
    2015 - 110 taps on hybrid pump + 3/16 natural vac
    - releaser posts every release event on twitter: https://twitter.com/ryebryesreleasr
    2014 - 30 taps on 3/16 gravity

  7. #1477
    Join Date
    Sep 2010
    Location
    Vermont
    Posts
    2,287

    Default

    Running 500 GPH here at the border. Sap is clearing up after a few hours of running. Tanks are cleaned again and the valves are closed. It's time to get back to sugaring. Should run all night and then tomorrow.

    Spud

  8. #1478
    Join Date
    Jan 2013
    Location
    Jonesville, Vermont
    Posts
    46

    Default

    I expected more here in Jonesville. The pumps started at 11:00 and I have about 100 gallons. I dumped the first 50 but it looks clearer now. Anytime I’m dumping the releaser in 10 minutes or less is great. Seems to be about 25-35 minutes at this point. Im thinking I’ll let it run all night and see if the trees are just slow to thaw. The ground is very dry here and I don’t think that helps. My 2¢
    425 trees on Vacuum
    Airiblo 3/4
    100 buckets
    Lapierre Mechanical releaser
    L3700 SU

  9. #1479
    Join Date
    Apr 2012
    Location
    poultney vermont
    Posts
    880

    Default

    very slow, turned pumps off, 2200 taps 200 gals 6 hrs. I guess when you hit april, and the ground has hardened up below, as well as chemical changes in the tree from recent 70's for 3 days its game over. I guess could have saved up for a couple days but if it didn't do much today then I cant see it getting any better!!
    18x30 sugarshack
    5100 taps high vac
    3x10 inferno with steampan
    7'' wes fab filter press
    10'' cdl air filter press
    D&G 3 post reverse osmosis w/recirculation

  10. #1480
    Join Date
    Apr 2009
    Location
    Bristol, VT
    Posts
    1,978

    Default

    Or your tapholes just dried up. I'm still getting an impressive amount of sap on gravity...tempting but not going to do it.

    For anyone still interested I did start a thread on making buddy syrup.

    http://mapletrader.com/community/sho...Flavored-Syrup
    About 750 taps on High Vac.
    2.5 x 8 Intens-O-Fire
    Airtech 3 hp LR Pump
    Springtech Elite 500 RO
    14 x 24 Timber Frame SugarHouse
    16 x 22 Sap Shed w/ 1500 gal. + 700 gal. tanks
    www.littlehogbackfarm.com

+ Reply to Thread
Page 148 of 385 FirstFirst ... 4898128138139140141142143144145146147148149150151152153154155156157158168198248 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts