+ Reply to Thread

Thread: Checking what VT sugar makers are doing

  1. #1091
    Join Date
    Mar 2013
    Location
    Readsboro, VT
    Posts
    335

    Default

    After floundering a few days on the decision, with the forecast staying, and becoming more favorable, I started getting ready. This could be a very good run for me here. All the forecasts call for Sunday and Monday 41-45, a reset of 28 Monday night, and Tuesday and Wednesday 45-50...
    Cleaned out and organized my little sugarhouse yesterday, broke out my vacuum system, and tested good after replacing the vacuum gauge. All my mainlines hooked up. Ready for sap!
    Tomorrow I tap, Saturday to Bellows Falls VMSMA conf, and more tapping Sunday.
    Should be ready to test my Home built Pro RO!

    Update...
    1/29
    130 taps put in today, with 30 drops added.
    1/31
    140 more tapped for 270 on vacuum. sap is running.
    Last edited by DoubleBrookMaple; 01-31-2016 at 05:08 PM.
    Eric of the Greens... I Fly Solo...
    2013-15 Block arch to having it all...
    2016...320 on vacuum. 155 gravity, 90 buckets.
    All homemade equipment except Smokey Lake pans.
    2x6 arch, Electric releaser w/ Gast 1023 24" vacuum
    2x4x40 RO w/ dual 265gph Procons
    My PWS with webcam... https://www.wunderground.com/persona...READS2#history

  2. #1092
    Join Date
    Mar 2005
    Location
    Green Mountains. (God's country.)
    Posts
    220

    Default

    I repaired one sugarbush yesterday and will do my second one today. I'm thinking about going for it too. Have you guys started drilling holes? I'm just worried about the holes drying up too soon. I'm not on Vacuum so my holes probably don't stay quite as clean. Sap probably kind of sits there.

    Though I put a bucket in one year in early January for a photo shoot and that seemed to run good when sugaring finally rolled around. (I think they might stay cleaner than a tap on tubing though.)

    Who ended up tapping?
    2x6 Lightning.
    450 taps on tubing. 20+ buckets.
    14 x 22 Post and Beam Sugarhouse.
    125 GPH Springtech Mini Elite R/O
    Member: International Springtech Mini Elite Owners Club. Serial # R6954


    Here's a big THANKS to my "tree owning" neighbors.

    And yes.....we too.....have a bunch of chickens.
    Correction... they went on strike..so the chickens are now gone.

    No...that's not true. We got some more chickens and sure enough...they are NOT laying.
    We never learn.

  3. #1093
    Join Date
    Mar 2005
    Location
    Green Mountains. (God's country.)
    Posts
    220

    Default

    You know what? I just opened the dining room curtains and was struck by the lack of snow cover out there. I'm going to go for it. I need conditions that promote natural flow of tree sap. Unlike last year.....I fear those conditions might not last long this year.
    2x6 Lightning.
    450 taps on tubing. 20+ buckets.
    14 x 22 Post and Beam Sugarhouse.
    125 GPH Springtech Mini Elite R/O
    Member: International Springtech Mini Elite Owners Club. Serial # R6954


    Here's a big THANKS to my "tree owning" neighbors.

    And yes.....we too.....have a bunch of chickens.
    Correction... they went on strike..so the chickens are now gone.

    No...that's not true. We got some more chickens and sure enough...they are NOT laying.
    We never learn.

  4. #1094
    Join Date
    Apr 2009
    Location
    Bristol, VT
    Posts
    1,978

    Default

    I decided to sit this thaw out. I generally prefer to tap frozen trees and I have a few other projects I would rather get done during the warmer weather this week. Going to get tanks cleaned, organize sugarhouse, and get some other equipment ready and will then start tapping next weekend. It looks like we will have about a two week stretch of winter at the least and my plan is to have all my taps in by mid February.

    Justin - It is a bit risky tapping this early with gravity tubing and buckets. If you are using new spouts then you may be alright. If we do end up going until April, two months may be pushing it with old spouts.
    About 750 taps on High Vac.
    2.5 x 8 Intens-O-Fire
    Airtech 3 hp LR Pump
    Springtech Elite 500 RO
    14 x 24 Timber Frame SugarHouse
    16 x 22 Sap Shed w/ 1500 gal. + 700 gal. tanks
    www.littlehogbackfarm.com

  5. #1095
    Join Date
    Jan 2014
    Location
    West Newbury, Vermont
    Posts
    8

    Default

    I'm waiting another two weeks before I hope too start tapping. I'm strickly on buckets.

    Steve
    2x4 D&G single pan evaporator
    80 taps

  6. #1096
    Join Date
    Mar 2009
    Location
    ANDOVER, VT
    Posts
    773

    Default

    Quote Originally Posted by Justin Turco View Post
    I repaired one sugarbush yesterday and will do my second one today. I'm thinking about going for it too. Have you guys started drilling holes? I'm just worried about the holes drying up too soon. I'm not on Vacuum so my holes probably don't stay quite as clean. Sap probably kind of sits there.

    Though I put a bucket in one year in early January for a photo shoot and that seemed to run good when sugaring finally rolled around. (I think they might stay cleaner than a tap on tubing though.)

    Who ended up tapping?
    I started taping yesterday, I was only able to install 250 or so. Every hole I drilled sap ran out very well. I'm going back in woods today to continue. I'm hoping to have our first boil sometime this week.
    vacuum
    RO
    filter press
    auto draw
    New leader oil fired


    http://s712.photobucket.com/albums/ww123/jtrap/

  7. #1097
    Join Date
    Mar 2009
    Location
    ANDOVER, VT
    Posts
    773

    Default

    Just finished up taping for today, I'm just shy of 800. Every tap is running well and I'm getting lines all good and tight. No leaks. This weather is kinda of great. I don't really ever get a chance to tap and check leaks before a good run. This year seams the weather is helping me. I will keep the pump on all day and night starting tomorrow. Hoping to get the new membranes in the ro tomorrow as well.
    vacuum
    RO
    filter press
    auto draw
    New leader oil fired


    http://s712.photobucket.com/albums/ww123/jtrap/

  8. #1098
    Join Date
    Mar 2013
    Location
    Readsboro, VT
    Posts
    335

    Default

    I got 330 tapped and wound up with 240 gal of 1.5 and the sap tastes OK, so I may boil it after putting it through my test run of my newly built RO. I can boil with my anticipated Wednesday run. It is freezing up here for a day.
    I usually get 1.7 here, so this isn't all that bad for me.
    Like Parker Maple said, the weather was good for tapping, and it was nice not going out this year on 3 feet of snow.
    Last edited by DoubleBrookMaple; 02-01-2016 at 09:27 PM.
    Eric of the Greens... I Fly Solo...
    2013-15 Block arch to having it all...
    2016...320 on vacuum. 155 gravity, 90 buckets.
    All homemade equipment except Smokey Lake pans.
    2x6 arch, Electric releaser w/ Gast 1023 24" vacuum
    2x4x40 RO w/ dual 265gph Procons
    My PWS with webcam... https://www.wunderground.com/persona...READS2#history

  9. #1099
    Join Date
    Apr 2009
    Location
    Newfane, VT
    Posts
    323

    Default

    You folks are inspiring, but looks like I'm going to miss this early start. Just wasn't in the cards to be able to drop everything at the end of January to jump into sugaring.

    I am going to start working on tubing repairs and setting tanks today. Also hope to have the sugarhouse ready to go by the end of the week.

    Good luck all!
    300 on vaccum
    300 gravity tubing
    200 buckets

    100 hilltop acres
    16x20 timberframe sugarhouse built in 2010
    3x10 Leader max flue & revolution pans w/ Inferno arch - 2013
    1998 Kubota M5400

    Northwoods Farm and Forestry on Facebook.

  10. #1100
    Join Date
    Jul 2009
    Location
    Cornwall VT
    Posts
    126

    Default

    This weather is definitely getting me worked up! However I'm committed to finishing my last expansion for this woods we're putting in drops now, Hope to have 1200 or so new taps. The weather has been awesome for working in the woods this year!
    I'm planning to start punching holes this weekend. looks like a couple of weeks of colder weather starting after this week hopefully that's the case so can be all tapped and ready when it warms up again!
    10,600 taps on vacuum
    5x16 CDL Master / with steam pan
    3600 GPH CDL RO

+ Reply to Thread
Page 110 of 385 FirstFirst ... 106090100101102103104105106107108109110111112113114115116117118119120130160210 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts