+ Reply to Thread
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 29

Thread: Poplar wood

  1. #11
    Join Date
    Mar 2010
    Location
    Pembroke, Ontario
    Posts
    120

    Default

    Poplar burns fine. Make sure it isn't green. We tend to mix woods together when we're firing. A few large pieces of poplar, one or two medium pieces of pine to really get her going and a few small pieces of birch or maple to give a good sustained heat and lay down a good bed of coals. We throw in a piece of spruce now and then also.We split up old barnboards into small pieces and throw 2-4 of them in at a time when we're finishing off. Basically if it makes the sap boil and almost jump out of the pan-use it!!
    Help relatives every year:
    A few hundred taps on 3/16 into 3/4" mainline
    Can't stop thinking maple, more fun, than work.

  2. #12
    Join Date
    Apr 2009
    Location
    east kingston, nh
    Posts
    4,161

    Default

    I split it small like everything elseand put it the mix but it does burn good as long as it is seasoned and dry poplar is very porous wood and is like a sponge with water.

    I have some still from over the years and I like to burn it on th corner months of winter when you need a quick warmup of the house. start it up fire it a few times and let it go out. it burns quick pretty clean and goes out fast. It doesn't produce any coals like maple that has tons so there is no residual heat from poplar. So by the time it warms up outside the house is warm too.

    If you have the North amercn maple book there is list there of the btu per cord in there too. everone has there system of mixing types of wood. as long as it burn and isn't plywood, PT, or painted it goes in!!!!
    Last edited by red maples; 03-30-2010 at 08:22 AM.
    may your sap be at 3%
    Brad

    www.willowcreeksugarhouse.com
    585 or so on Vacuum, about 35 on buckets/sap sacs
    Atlas Copco GVS 25A Rotary Vane vacuum pump
    MES horizontal electric releaser
    2x6 ss phaneuf Drop flue, Leader woodsaver blower, homemade hood
    300gph H2O RO
    husquvarna 562 XP
    Its Here!!! 2025 season is here get busy!!!

  3. #13
    Join Date
    Apr 2009
    Location
    wisconsin
    Posts
    54

    Default wood

    uesd alot of iron wood this year,very very hot fires,hard on the chainsaw and my saw rig but well worth the btu's.
    800 buckets
    350 on vaccum
    2x6 small bros with aof-auf
    1 bizzlian small pieces of firewood
    tractor,gator, skid loader with tracks
    2 helpfull boys
    understanding wife
    molly-tired chocolate lab buddy
    14x20 cook shack
    Ro and more tanks
    A ton of other stuff

  4. #14
    Join Date
    Jan 2006
    Location
    Oneida NY
    Posts
    11,774

    Default

    Yes, burn it. Quick heat. must be dry. I mix and burn everything, no dead wood is safe.
    Dave Klish, I recently bought a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
    Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
    Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
    After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.

  5. #15
    Join Date
    Nov 2010
    Location
    hayward,wi
    Posts
    60

    Default

    Make sure it is well seasoned (dry). I mix wth dry seasoned oak. Only time I had any troubles was when it was not seasoned enough.

  6. #16
    Join Date
    Jun 2010
    Location
    Northern Michigan
    Posts
    5

    Default

    Quote Originally Posted by vtsnowedin View Post
    I'm in full agreement with 3rdgen.maple. Middle of the road as heat goes when dry and a lot better in the shed then having them compete with you young replacement sugar maples. I can't seem to get ahead of them. As a weed tree they must be genetically linked to witch grass. Skip mowing a field for one year and they are six feet high.
    I've been told, by people I trust about trees, that poplars actually grow from the same root structure. Kinda like a mushroom fungus. Thats why they keep growing back. you have to till down about three feet to kill the primary roots in order to remove them from an area.

  7. #17
    Join Date
    Jan 2008
    Location
    n bennington vt
    Posts
    775

    Default

    here is the great thing about it ..one if u are buying wood usually your local logger is almost willing to give it to u .... what i do is take a chunk and split it into slabs about 2 inches thick and heap it then put the splitter away and pick up a small liming axe and my double bit and split it into 3x2 pieces leave them in the sun for a week then stack it drys so well and so light i don't agree that u need more then say pine and here is another thing i find its the bark that splashes not so much the wood the grain is so straight that i can do this with very little effort i also find if i have a load of hardwood when i am drawing i toss a piece of that or two under the draw off side then i don't have to feed it so fast ... and a little background on pop yes will grow 6 to 8 feet a year as a cabinet maker we used it a lot for paint grade and interior blocking and such ...its also know as poor mans walnut cause it will take a stain and look just like walnut but as said if u dont split it and store it properly it will rot in a few years

  8. #18
    Join Date
    May 2009
    Location
    UVM Proctor Maple Research Center, Underhill Ctr, VT
    Posts
    6,484

    Default

    Quote Originally Posted by adam1493 View Post
    I've been told, by people I trust about trees, that poplars actually grow from the same root structure. Kinda like a mushroom fungus. Thats why they keep growing back. you have to till down about three feet to kill the primary roots in order to remove them from an area.
    That is true. When you see a hillside of trees totally covered in poplar, it is probably one individual. All the stems you see are basically clones, oftentimes still all connected underground. Beech are similar. Maples, birches, oaks and conifers don't do this.
    Dr. Tim Perkins
    UVM Proctor Maple Research Ctr
    http://www.uvm.edu/~pmrc
    https://mapleresearch.org
    Timothy.Perkins@uvm.edu

  9. #19
    Join Date
    Mar 2009
    Location
    Ashtabula County, Ohio
    Posts
    1,792

    Default

    In my neck of the woods I think people often confuse what a poplar tree really is. We have "hybrid" poplar, which is fast growing, has nasty root systems with a ton of shoots, and foul smelling. These have come from people planting these "miracle growth" trees in their yards, then the root systems spread out uncontrolled. Quaking Aspen grows with this type of root system, too. People often call aspens "poplar" around here. The real poplar in my mind is tulip poplar. Beautiful straight trunks with no branches for several feet. Grows to over 100 feet tall. Very good for milling into paintable interior house trim. This is what I will be burning this year in the evaporator. I plan to cull several of these per year.

  10. #20
    Join Date
    Mar 2010
    Location
    Sandstone, Minnesota
    Posts
    483

    Default

    It is interesting how common names abound by region.

    Hybrid poplars are generally some type of cross with popular deltoides and or canadensis. Basically hybrid cottonwoods.. Many of which are seedless.

    The genus populus or trees which go by the common name poplar have many species.

    Populus Tremuloides or "Quaking Aspen" is just one of many species of poplar's. Included in this genus are cottonwoods, sawtooth aspen, populus x acuminata, populus balsamifera and many others. Most do sucker readily and is the main means of self propagation. Many are very prolific seed producers as well. Most are hardy from zones 2 through 5.

    Tulip Tree a very stately tree (Liriodendron tulipifera) which many Eastern's call a poplar is not a poplar at all. It is mainly found in zones 5-9. While is is a beautiful shade tree and has nice wood for carving and turning it is not a member of the poplar family.

    Woodsman
    Last edited by lastwoodsman; 02-02-2011 at 11:56 AM.
    Scarlet Jewell Sugar Shack LLC
    Sandstone, MN 55072
    16 x 24 sugar shack
    crescendo auto drawoff,

    Home built ro with a Dow xle 4040 membrane.
    1 1/2 hp motor on 220 drawing 8 amps
    Gravity feed


    300 taps on vacuum

    2 x 6 Smokey Lake Corsair arch with blower and pans and preheater
    1529 Massey Ferguson, Yamaha Wolverine

    https://www.facebook.com/ScarletJewellSugarShack

    Instagram. Mapleshack

    http://www.youtube.com/watch?v=AOnmFMBgU10

+ Reply to Thread
Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts