+ Reply to Thread
Results 1 to 4 of 4

Thread: Washing Orlon bags.

  1. #1
    Join Date
    Feb 2017
    Location
    Central Wisconsin
    Posts
    401

    Default Washing Orlon bags.

    Do you put the inside out for washing and then reverse them again after washing? Or does that constitute twisting and become harmful for the bag? I usually wash after every 5-10 gallon filtering.
    Also seam in or out when filtering. I washed my Orlon so much I lost track of my flips? lol
    1960 - 1970s 70 taps on galvanized buckets with Dad and Grandpa.
    1970s - 1985 Acted crazy!
    1986 - 2005 20-30 buckets.
    2006- 2017 70 buckets and bags
    2017-2019 100 bags and buckets
    2020 Finally retired!!! 75 buckets, 50-75 on tubing. RO Bucket, New 12 X 16 Shack and a 36X42 flat pan.
    2021-Adding another 125 taps along with a second RO bucket.
    Lots of Family and Friends and a dog named Skyy!

  2. #2
    Join Date
    Mar 2005
    Location
    Albion PA
    Posts
    4,987

    Default

    Trapper,
    LOL, I always had the seam out away from the sugarsand. I flipped them inside out all the time too. Used as much pressure from spray hose as possible with very hot water. Gentle squezze when done to remove most of the water.
    Regards,
    Chris
    Casbohm Maple and Honey
    600 roadside taps
    3x10 King, WRU, AOF and AUF
    12" SIRO Filter Press.
    2015 Ford F250 PSD sap hauler
    One Golden named Maggie Cat named Lucy
    Too many Cub Cadets
    Ford Jubilee and several Allis WD's, and IH tractors

    www.mapleandhoney.com

  3. #3
    Join Date
    Apr 2011
    Location
    Fayston, Vt
    Posts
    121

    Default

    I have a wool and orlon and I rinse outside first, then put inside out and use kitchen sprayer to remove most off before spraying from inside out. I wear cloth lined vynal gloves from a farm store to spray inside out. Once the bottom get cleaned and warm, the bottom will then push out. You now can get it cleaned good. After niter filtering I get a large pot of water or permeate to a boil and soak it for a few minutes to soften niter and It is removed. Now it looks almost new.
    I turn inside out, I let them drain bottom up and most of the water will drain quickly. Over night it will dry.
    I just only filter 1 1/2 gallon at a time because any more is too heavy for me to pour into my filter, I can get a second batch though before cleaning or set orlon filter.
    Last edited by to100; 04-10-2019 at 10:22 AM.
    2020 same
    2019 RB10 26 taps
    2018 RO Bucket RB5 taps 20, leg tank in shed w/2 5/16
    2017 18 taps
    2016 20 taps
    2015 21 taps
    2014 30 2 gravity line, 2 hotel pan concrete arch 35 g leg tank
    2013 LP hook up in shack buckets 12 taps
    2 burner cook top 2012 finisher on a bbq tanks
    2011 rookie 2+ gal
    8 taps w/ milk jugs
    turkey cooker
    50-60 up back maybe

  4. #4
    Join Date
    Jan 2008
    Location
    Frankford, Ontario
    Posts
    997

    Default

    I rinse them off inside and out with the kitchen sprayer, then lay them in the bottom of the sink and cover with an inch of water, and swish / agitate by hand. Lift them to let the water run out and drain the sink. Rinse again, plug the sink and repeat the whole process about 8x until the water in the sink stays clear. I stand bottom up for a bit to get most of the water out, then (carry them dripping all over the floor over to the laundry room and) hang them above our laundry tub to drip and dry.
    I never bother to turn them inside out. The soaking seems to get the nitre out of the insides just as well
    Big_Eddy
    Eastern Ontario (Quinte)
    20+ years on a 2x3 block arch,
    Homemade 20"x64" drop flue since 2011

    Build a Block Arch
    Build a Flat Pan
    Build a Flue Pan
    Sweetening the Pans
    Build a Bending Brake
    Using a Hydrotherm
    How much Sap to Sweeten?

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts