Large capacity home made wood splitter designed for a sugaring arch or outdoor wood furnace. 42” length capacity, hydraulic adjustable 4 way wedge, hydraulic log lift table approx. 3' wide that doubles as a work surface when in the horizontal position, 2 speed split valve with high force to make the initial split and high speed to finish the split quickly with long length wood, 16 hp gas engine with electric start, hydraulic flow control valves on the lift table and wedge adjustment to fine tune the correct working speed, 2” ball receiver, detachable out feed table, the base I beam is a 5/8” flange x 12” beam (W12x64 beam). Main split cylinder is a 4” bore x 40” stroke 2500psi, the log lift and wedge adjustment cylinders are 2” bore 2500 psi, with all Prince valves. Overall length is approx. 14' from the tongue to the end of the out feed table (roughly 12' with the table detached) and the unit weighs over 2250lbs so a truck or small tractor is recommended to move it. It has never been registered for road towing, only towed using a SMV (Orange Triangle). Manufactured units that have similar features sell for $12,000 online without shipping. Asking $7000 obro. Call or text Kienan at 802-989-0505 or email kiegs-customs@hotmail.com