You will have time to run your tubing. a couple days work and you'll have it. Two hints, if someone hasn't already made them. Make a spooler or at least run some pipe through the spool of tubing and spin it off as you go. Don't try and hold it on your arm and unwind it, you'll have loops and tangles and hate your life. Search threads here for spoolers. Also run all your tubing and then put in your tees and drops. So much easier that way. While at bascombs buy a tubing holder or make one to help with putting in tees, unless you spend the big buck for a tubing tool. A thermos of hot water will help you soften the tubing for tees. Be sure and get several straight repair couplers, you will have leaks and need to make repairs.