Originally Posted by
Cjadamec
I really like the idea of using a quick clamp as the base for the tubing tool. I'm curious why you have the two bolts welded on, are they just as guide rods to keep everything aligned?
Ya the biggest issue with the tool was attaching the vise base to the clamp. It doesnt keep very straight with tension so those work as a guide to keep it closer to straight
Camp Wokanda
Peoria Park District
2023 - 210 on 3/16 shurflo, sap storage shack w/ 1100 gallon tank - 123 gallons
2022 - 210 on 3/16 shurflo, homemade vac filter & water jacket canner - 104 gallons
2021 - 215 on 3/16 shurflo, added 2nd membrane to RO - 78 gallons
2020 - 210 on 3/16 shurflo, upgraded hp pump on RO - 66 gallons
2019 - 150 on 3/16 shurflo, Deer Run 125 dolly RO - 73 gallons
2018 - 120 on 3/16 shurflo, 2x6 raised flue w/hood, homemade arch w/ AUF & AOF - 34.5 gallons