Brian,
Where is it I will pick it up!![]()
Brian,
Where is it I will pick it up!![]()
Last weekend a friend came over and we got most of the addition put on. I ran out of sheathing or I would have had all the roof done the project complete. I'll get the rest completed Saturday morning. Also buying shiplap siding to reside the SH so it looks more presentable.
I got pads leveled out for my 850 gal round bottom tank before the big freeze. Once I get the siding's on I can get that under my new addition.
I have 1.5 weeks of vacation starting the 23rd so my plan is to get all my woods work done...just my high mainline w/ sap ladder, 2 short mainlines, and adding some more taps.
After the woods are done it's just little things until the season starts.
Josh
2009 - 370 on vac. & 16 buckets
2010 - 377 on vac.
2011 - 590 on vac.
2012 - 620 on high vac., 170 buckets, 110 on gravity tubing
2013 - 830 mine + 800-1000 others
2014 - 870 mine + 800-1000 others
2017 - 920 mine + 500-700 others
2018 - 902 mine + 500-700 others
2019 - 902 mine + 700 others
2020 - 902 mine + ???? others
Atlas Copco Pump
2.5'x8' 802maple Special with Dallaire pans
H2O Innovation 600gph RO
Spring Harvest Website
Well things are on hold for a couple of days untill it gets warm enough to want to really do something out side. Have to get used to it being below zero F .
At least the trees can start on their long journey thru the winter now.
maybe 50 taps for 2011
Finally ready to boil when I get enough sap
I just might be crazy.( make that I know I am)
Trees all tapped except the ones with 5 feet of snow.
Enough rabbits to keep Elmer busy..
DaveY,
Beware we will be invading your sugar shack this weekend!
Brian,
Hope you got the syrup to its destination! and resumed you trip.
Chris
Casbohm Maple and Honey
625 roadside taps + Neighbors bring some sap too!
3x10 King, WRU, AOF and AUF
12" SIRO Filter Press.
2015 Ford F250 PSD sap hauler
One Golden named Maggie, Norwegian Forest Cat named Lucy
Too many Cub Cadets
Ford Jubilee and several Allis WD's, and IH tractors
1932 Ford AAB ton and a half, dump truck
www.mapleandhoney.com
3rdgen -
I think your selling yourself short - think your snow average has got to be closer to 200" year. Our average just up the road from you (and a bit higher) is closer to 250" and last year we did about 400". Ofcourse, last year we had a fast start and had almost 100" by Thanksgiving.
Danno
Just West of Syracuse
3 x 10 Lightning
Sihi Vacuum
Sap Bros RO
600 taps and buying sap
Expanding Slowly
90 % of Mainline installed, I have 3 400 foot sections of 3 quarter inch pipe to finish. Hired the land owner son to help me on his christmas break, he is a fast learner! we put up 2500 feet of tubing today. This was the first time he was out in the bush. He was shocked how many Maples is on their property.
If I can get 75% of them tapped it is going to create a couple extra gallons of sugar water.
Mark 220 Maple
1100 taps on low vaccum, 900 on gravity.
900 plus taps leased and on high vacuum
35 cfm Indiana Liquid Ring Vacuum Pump
80% Sugar, 20% Red MAPLES
http://s247.photobucket.com/albums/g...Maple%20Syrup/
Sugarmaker,
Bring as many as you can put in your truck , including the bed! Make sure you have sun glasses.![]()
danno you must be refering to your redfield piece. I was just thinking about last year alone and we had 3 specific storms that I remember where we had a total of 14 feet of snow just with them. I am willing to bet that data is really wrong that I looked up as well. Man you think wow that is alot but we get quite a few warmups and and alot of it melts within a short period of time. I always take some time of about the second week of January for steelhead fishing because for as long as I can remember we get a nice week or better warmup. 3 years ago it was in the 60's on my Bday in january. I was fishing in a sweatshirt in alot of snow.
2X6 deluxe Phanuef
Adding 200 more every year
27 years left of building a Hobby into a retirement time burner.
wired a 5 horse motor and mounted it onto our new induction fan. The motor i got from a auction, (like brand new). hooked it into the 220 outlet and the darn thing spun counterclock wise. fan is supposed to run clock wise. No wire diagram on the century motor, so i called around ,and the local motor rebuilder (who is now retired) is going to reverse the poles for me. Motor that was on the fan was a 1725 rpm, this 5 horse is a 3450 so i am hopeing that we have so much draw that i can crack the back door on the arch to regulate the draw and also let it suck cooler air up to the impeller blades. Tomorrow morning we will take the old fan off the sugar house roof and hoist the new one up there. The unit is 230 pounds so we will use the loader tractor and then drag it up the roof with a rope. Hope to get done in time to ice fish a few small lakes i never fished before. Mild weather this weekend, in the mid 20's so a person should work a little but also play a little right?? December sure is flying by!
Rhino is it a 3 phase motor or a single phase?
2X6 deluxe Phanuef
Adding 200 more every year
27 years left of building a Hobby into a retirement time burner.