Matt, without an evaporator are you planning on making syrup in your RO machine?
Matt, without an evaporator are you planning on making syrup in your RO machine?
Josh
2009 - 370 on vac. & 16 buckets
2010 - 377 on vac.
2011 - 590 on vac.
2012 - 620 on high vac., 170 buckets, 110 on gravity tubing
2013 - 830 mine + 800-1000 others
2014 - 870 mine + 800-1000 others
2017 - 920 mine + 500-700 others
2018 - 902 mine + 500-700 others
2019 - 902 mine + 700 others
2020 - 902 mine + ???? others
Atlas Copco Pump
2.5'x8' 802maple Special with Dallaire pans
H2O Innovation 600gph RO
Spring Harvest Website
Lou I am going to have to try the 21% in my own evaporator. I didn't get a chance to taste much of Theron's, he was being stingy with the sample cups. The stuff I did taste had a first run with new tubing flavor to it that someone else might think was good.
Jeff the CDL is bone *** stock. The only modification was to add a concentrate line that went back to the main sap storage tank. The RO runs a lot longer but not very hard.
Russ
"Red Roof Maples" Where the term "boiling soda" was first introduced to the maple world!
1930 Ford Model AA Doodlebug tractor
A couple of Honda 4 wheelers
Four chainsaws and no chickens!
Guys- Im not going to be on here for a little while. If I dont answer messages dont be affended. Its running pretty good and Im kind of struggling getting kinks out of things. Gonna boil again tonight. Still not up to a full hard run but seems to be adding up. Im pumping stuff and countering freezups and just trying to get in the groove. Update soon. Looks like its going to run steady till thursday night and as the ground loosens up it just keeps picking up. Theron
You go man. I hope in a couple of weeks I won't have time for this either!!!
Jeff Emerson
www.emersonsmaplehill.com
3x12 Leader with over air, custom piggyback, 600gph CDL RO
2500 on 25" vacuum
350 4 wheeler, 500 snowmobile, and 1950's Ford 600 tractor, Husqvarna! (261, 372xpBigBore, 562xp), Stihl MS193 for in tree work
I forgot this is the Feb Journal, not the watch and see how far below the sap line Theron gets!
In NW Wisc we are having a major thaw right now, 3-4 days of above freezing and rain. The snow is going down fast. Next week is suppose to get back to normal, highs in the mid 20's to 30.
I am done with one side of my woods, finished connecting one big releaser and securing the vacuum line. I have about 100 more trees I can get to on this side of the woods, though they are widely scattered so I am not sure if I am going to push for them right now.
I have started working on releaser/pump house #2, with is below perhaps 1000 maples on the other side of my woods. My goal is to have 300 or so on line by March 1, and keep working at adding to it until I run out of trees. I would think by the end of the season I could get maybe 5-600 going to this pump house, all of them by next season.(push push!)
I am going to initially shoot for 12% sap coming from the RO and if I can, try the recirculation to the big tanks and push the % up. Pete Roth thought I should go easy with standard concentration until I get used to boiling on the 3x12, then try experimenting from there. Good Idea!!!
Getting the itch big time. The plus side is I hope to be making syrup when some of you south easterners are writing away the hours complaining about clean up!
Good season to all!
Jeff Emerson
www.emersonsmaplehill.com
3x12 Leader with over air, custom piggyback, 600gph CDL RO
2500 on 25" vacuum
350 4 wheeler, 500 snowmobile, and 1950's Ford 600 tractor, Husqvarna! (261, 372xpBigBore, 562xp), Stihl MS193 for in tree work
Out taps have been dripping verrrrrry slowly since they went in on Saturday afternoon. I think the trees are just now starting to truly thaw out. Temps have been around 40, but with lots of cloud cover and a fair amount of wind on Sunday. Tomorrow we'll hit 55 or so and it should pick up significantly, but we're back down to the low 30's over the weekend.
Another week or two here I think. I'll put in 50 taps Thursday and another 50 next Tuesday. We're ready....
Sugar Daddy, where are you located?
Jeff Emerson
www.emersonsmaplehill.com
3x12 Leader with over air, custom piggyback, 600gph CDL RO
2500 on 25" vacuum
350 4 wheeler, 500 snowmobile, and 1950's Ford 600 tractor, Husqvarna! (261, 372xpBigBore, 562xp), Stihl MS193 for in tree work
Jerry- Ive already had to start putting it in the semi trailer to be able to not be up all night to boil. Theres probly going to be a lot for you this weekend. Theron
WAAAAHOOOOO!! Load 'em up Theron---I've been waiting to make syrup since last April! Pretty amazing it only took 1 boil to get them boys from the East Coast hooked on high concentrate. You, Russ, and Matt had better get some thick skin, there will be plenty of folks doubting your syrup flavor with high concentrate. I know that you fellas can now understand, it really is easy to boil the high concentrate. Keep your head above the sap, helps coming this weekend!
2 1/2 x8 Lapierre Waterloo-Small (oil fired)
Leader Steamaway
1200 gph Lapierre RO
1800 taps
http://s268.photobucket.com/albums/j...ks/Sugarhouse/
Mike Christian
505 Main St. Orwell, Vt.
Its been a long time since I got to burn someone elses pan and blow up a membrane, ye haw.
Thats going to be more fun then destroying Mikes RO
Success is not final,failure is not fatal.It is courage to continue that really counts
“I have not failed. I’ve just found 10,000 ways that won’t work.”
– Thomas Edison