+ Reply to Thread
Results 1 to 9 of 9

Thread: snow shoes

  1. #1
    Join Date
    Jul 2011
    Location
    Northville/Ephratah-sugarhouse
    Posts
    361

    Default snow shoes

    Well,1st time in several years gonna have to take snowshoes off the wall and put them to use,gonna be slow tapping this year

  2. #2
    Join Date
    Jan 2015
    Location
    Catskill Mts, Ulster County NY
    Posts
    622

    Default

    Not as much snow here in the Kingston/Woodstock area, but still will be different than the past few years which were without any snow. I will have to break out the boots, and the stream I have to cross will be frozen. We do have snow in the forecast this week, that is, if it holds up. Keeps changing every time I check, and they lower the snowfall amounts.
    Gary / Zena Crossroads / 42˚ 00' 24" N / Hobby in Early '70s, Addiction since 2014

    200+ taps on 3/16 (60 of which are on two Lunchbox Vac/Releasers)
    12x34 timber framed sap house w/attached 10x34 shed roof for storage
    2 x 6 Smoky Lake hybrid pan on oil fired Corsair arch with steam hood/concentric exhaust/auto draw-off
    7.0 KW Sun Power PV System, Smokey Lake Filter Press/Steam Bottler, Modified NGMP RO - 2 4x40 posts 200 gph

  3. #3
    Join Date
    Feb 2015
    Location
    Saratoga, NY
    Posts
    511

    Default

    I really don't mind, personally — it comes to a point where you've amassed all the gear and equipment you need to handle winter weather, it's almost a shame not to get to use it. Plus, as a hobby sugarer, it's as much about the nostalgia for me as anything.

    I may even borrow the neighbor's snow machine to pack down our trails before we head out President's Day...happy tapping!
    --
    2015: 8 bucket taps (7 red, 1 sugar) on DIY barrel evaporator
    2016: 13 taps (bucket and tube) on block arch and hotel pans
    2017: SAME
    2018: 25 taps on 2x3 flat pan and resurrected barrel arch
    2019: 25 taps...same setup plus DIY 3x150gpd RO filter
    2020: 50 taps, all buckets..."new" oil tank arch setup
    2021: 100 taps (50/50 buckets/3-16 tubing) on 2x4 divided pan
    2022: 150 taps (50/100 b/t) on 2x4 pan with sap warmer pan
    2023: SAME
    2024: 150 taps, added single-post 4x40 RO system

  4. #4
    Join Date
    Sep 2020
    Location
    Corbeil, ON
    Posts
    184

    Default

    I like to use my snowshoes and toboggan to tap trees. I can drag the buckets, spiles and tool bag instead having to carry everything. I use the toboggan with 5 gallon pails strapped in and snowshoes to collect as long as I can until the snow melts, then it's carrying pails through the woods.
    2021 - Year one. 15 taps using 5/16" and drop tube into buckets. Homemade barrel evaporator with 2 steam trays.
    2022. 32 taps. Added AUF.
    2023. 51 taps. Ditched the steam pans for an 18x22 flat pan.
    2024. 56 taps. Built a proper evaporator to fit the 18x22 flat pan and 1 steam pan.
    2025. 62 taps.

  5. #5
    Join Date
    Mar 2016
    Location
    chester, ma
    Posts
    967

    Default

    Quote Originally Posted by aamyotte View Post
    I like to use my snowshoes and toboggan to tap trees. I can drag the buckets, spiles and tool bag instead having to carry everything. I use the toboggan with 5 gallon pails strapped in and snowshoes to collect as long as I can until the snow melts, then it's carrying pails through the woods.
    Yeah, I have a big sled, I think it's designed for carrying firewood. When there's snow on the ground it makes collecting a breeze, just put the collection barrel in there and drag it around. When there's no snow it's a big pain. That said, I haven't dealt with really deep snow in a few years. This year there may wind up being a couple feet or more. That will be a challenge if it gets soft and I'm post-holing around.

    GO
    2016: Homemade arch from old wood stove; 2 steam tray pans; 6 taps; 1.1 gal
    2017: Same setup. 15 taps; 4.5 gal
    2018: Same setup. Limited time. 12 taps and short season; 2.2 gal
    2019: Very limited time. 7 taps and a short season; 1.8 gals
    2020: New Mason 2x3 XL halfway through season; 9 taps 2 gals
    2021: Same 2x3, 18 taps, 4.5 gals
    2022: 23 taps, 5.9 gals
    2023: 23 taps. Added AUF, 13.2 gals
    2024: 17 taps, 5.3 gals
    2025: 17 taps
    All on buckets

  6. #6
    Join Date
    Sep 2020
    Location
    Corbeil, ON
    Posts
    184

    Default

    I've been snowshoeing my trails since December to keep them open. I also make them double wide so that when the snow starts melting I can walk in the middle without sliding off the sides. I learned the hard way the first year, it was like trying to walk on the ridge of the roof with buttered feet, kept sliding of the sides of the trail.
    2021 - Year one. 15 taps using 5/16" and drop tube into buckets. Homemade barrel evaporator with 2 steam trays.
    2022. 32 taps. Added AUF.
    2023. 51 taps. Ditched the steam pans for an 18x22 flat pan.
    2024. 56 taps. Built a proper evaporator to fit the 18x22 flat pan and 1 steam pan.
    2025. 62 taps.

  7. #7
    Join Date
    Jan 2020
    Location
    Ballston Lake, NY
    Posts
    218

    Default

    Once the paths to the trees get packed down and start icing up, I put the creepers on my boots. I have a pretty steep slope to get to some of my buckets and it becomes downright dangerous without the creepers.

  8. #8
    Join Date
    Jan 2006
    Location
    Oneida NY
    Posts
    11,710

    Default

    Just be carefull using the snowshoes. Several years ago I got into a tight spot. I had 3 helpers working, but since one section only needed about 30 more taps put in, I sent all 4 in the opposite direction. As I was crossing a wash out ditch which was about 8' wide and 6' deep i had one snowshoe tip enough that my food went down beside the snowshoe and my left leg ended up with my knee against my chest and my right foot was down thru some brush with no support under it. At the time I was maybe 65 yrs old. I couldn't get to my phone and my 3 helpers were about 400 yds away.
    I did finally get myself out but it was a very real challenge.
    Dave Klish, I recently bought a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
    Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
    Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
    After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.

  9. #9
    Join Date
    May 2002
    Location
    Cabot Vermont
    Posts
    681

    Default

    Sounds like sugaring to me, so you do gymnastics too.
    Blaisdell's Maple Farm
    started on a 2x2 pan in 2000 with Gramps buckets
    custom built oil fired 4x12 arch by me
    Thor pans Desinged by Thad Blaisdell
    4500 taps on a drop flue 8-4 split

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts