Last night I went through the woods to cut off all the old spouts and run a peroxide mix through all the lines, checking for leaks. I need to move the solar system and pump into place, finish my "manifold" connection to the lines of 3/16 at the collection point, and swap out the old IBC for our new giant *** sap tank.
Based on the 14 day weather, our traditional tapping date of President's Day looks just about perfect. LFG!
--
2015: 8 bucket taps (7 red, 1 sugar) on DIY barrel evaporator
2016: 13 taps (bucket and tube) on block arch and hotel pans
2017: SAME
2018: 25 taps on 2x3 flat pan and resurrected barrel arch
2019: 25 taps...same setup plus DIY 3x150gpd RO filter
2020: 50 taps, all buckets..."new" oil tank arch setup
2021: 100 taps (50/50 buckets/3-16 tubing) on 2x4 divided pan
2022: 150 taps (50/100 b/t) on 2x4 pan with sap warmer pan
2023: SAME
2024: 150 taps, added single-post 4x40 RO system
Looks like a pretty decent dump of snow over the next 24 hours (8-12” forecast) and then real cold for the next 10 days or so. Probably decent for tapping but not much else.
--
2015: 8 bucket taps (7 red, 1 sugar) on DIY barrel evaporator
2016: 13 taps (bucket and tube) on block arch and hotel pans
2017: SAME
2018: 25 taps on 2x3 flat pan and resurrected barrel arch
2019: 25 taps...same setup plus DIY 3x150gpd RO filter
2020: 50 taps, all buckets..."new" oil tank arch setup
2021: 100 taps (50/50 buckets/3-16 tubing) on 2x4 divided pan
2022: 150 taps (50/100 b/t) on 2x4 pan with sap warmer pan
2023: SAME
2024: 150 taps, added single-post 4x40 RO system
Looks like it'll be at least a couple more weeks of cold weather. Going to be some deep snow to walk through when tapping finally comes around!
Yeah, it should be an interesting start to things…we are expecting 10-14” over the course of the weekend into Monday. I’m a little excited, honestly, as it’s been a while since we’ve had the winter maple conditions I remember as a kid in VT.
--
2015: 8 bucket taps (7 red, 1 sugar) on DIY barrel evaporator
2016: 13 taps (bucket and tube) on block arch and hotel pans
2017: SAME
2018: 25 taps on 2x3 flat pan and resurrected barrel arch
2019: 25 taps...same setup plus DIY 3x150gpd RO filter
2020: 50 taps, all buckets..."new" oil tank arch setup
2021: 100 taps (50/50 buckets/3-16 tubing) on 2x4 divided pan
2022: 150 taps (50/100 b/t) on 2x4 pan with sap warmer pan
2023: SAME
2024: 150 taps, added single-post 4x40 RO system
Ordered all new check valve and stubby adapters from Bascoms, they were due to deliver Wednesday...today they're telling me they arrived at the regional distribution center IN SOUTH CAROLINA! Sigh...I'm planning to tap on Monday and have help lined up, may need to come up with a Plan B real fast.
--
2015: 8 bucket taps (7 red, 1 sugar) on DIY barrel evaporator
2016: 13 taps (bucket and tube) on block arch and hotel pans
2017: SAME
2018: 25 taps on 2x3 flat pan and resurrected barrel arch
2019: 25 taps...same setup plus DIY 3x150gpd RO filter
2020: 50 taps, all buckets..."new" oil tank arch setup
2021: 100 taps (50/50 buckets/3-16 tubing) on 2x4 divided pan
2022: 150 taps (50/100 b/t) on 2x4 pan with sap warmer pan
2023: SAME
2024: 150 taps, added single-post 4x40 RO system
7-14" of snow and potential .5" - .75" of ice on Sunday. I anticipate a lot of limbs and trees to come down if that forecast is accurate!
Do you have a local supply store nearby that you could buy from?
2004 - 2012 2x3 flat pan 25 to 60 taps
2012 2x3 new divided pan w/draw off 55 taps
2018 - didn't boil surgery - bought new evaporator
2019 new SML 2x4 raised flue high output evap. 65 taps
made 17 gal. syrup
2020 - only put out 53 taps - made 16.25 ga.l syrup
2021 - Didn't work out
2022 - 25 taps on bags / 8 taps on 3/16's line - late start
I'd say drive over to the CDL store in Castile NY but Bascoms in Vermont is closer!Originally Posted by ADK_XJ
John Allin
14x18 Hemlock Timber Frame Sugar House 2009
Leader 2x6 w/Patriot Raised Flue Pan 2009
Leader Steam Hood 2014 - Clear Filter Press 2015
Leader Revolution Pan and SS Pre-Heater 2016
CDL Hobby 250 RO & Air Tech L25 Hi Vac Pump 2019
06' Gator HPX to collect wood & sap
14' Ski-Doo Tundra for winter work in the woods
Great Family 3 grown kids+spouses and 7 grand kids who like the woods
7th Gen Born in Canada - Raised in Chardon Ohio - Maple Capital of the World..<grin>.
Yeah, same here - now I’m glad that I haven’t tapped in yet!
--
2015: 8 bucket taps (7 red, 1 sugar) on DIY barrel evaporator
2016: 13 taps (bucket and tube) on block arch and hotel pans
2017: SAME
2018: 25 taps on 2x3 flat pan and resurrected barrel arch
2019: 25 taps...same setup plus DIY 3x150gpd RO filter
2020: 50 taps, all buckets..."new" oil tank arch setup
2021: 100 taps (50/50 buckets/3-16 tubing) on 2x4 divided pan
2022: 150 taps (50/100 b/t) on 2x4 pan with sap warmer pan
2023: SAME
2024: 150 taps, added single-post 4x40 RO system
I do but they don’t carry spouts for 3/16 drops…this whole thing got kicked off when I asked them to order them back in the fall and then found out in January that none of their dealers carry them 🤦*♂️
--
2015: 8 bucket taps (7 red, 1 sugar) on DIY barrel evaporator
2016: 13 taps (bucket and tube) on block arch and hotel pans
2017: SAME
2018: 25 taps on 2x3 flat pan and resurrected barrel arch
2019: 25 taps...same setup plus DIY 3x150gpd RO filter
2020: 50 taps, all buckets..."new" oil tank arch setup
2021: 100 taps (50/50 buckets/3-16 tubing) on 2x4 divided pan
2022: 150 taps (50/100 b/t) on 2x4 pan with sap warmer pan
2023: SAME
2024: 150 taps, added single-post 4x40 RO system
Posting Permissions
Reply With Quote