Sorry if this has been gone over, I just havent found it. but what is the difference between 20P, 25P, and 30P? is there different times you should use one or the other?
Thanks
Chris
Mainline density
Sorry if this has been gone over, I just havent found it. but what is the difference between 20P, 25P, and 30P? is there different times you should use one or the other?
Thanks
Chris
230ish taps on double Guzzler vacuum 25-27" Hg with two sap ladders
The only one I'm familiar with is 30P, I have no idea what 20P or 25P might be. I've also only noticed the 30P on Leader tubing.
Dave Klish, I recently bought a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
If you type in difference between 20p and 30p maple tubing into google search you will find a heading that will refer you back to mapletrader and explain the differences.
2004 - 2012 2x3 flat pan 25 to 60 taps
2012 2x3 new divided pan w/draw off 55 taps
2018 - didn't boil surgery - bought new evaporator
2019 new SML 2x4 raised flue high output evap. 65 taps
made 17 gal. syrup
2020 - only put out 53 taps - made 16.25 ga.l syrup
2021 - Didn't work out
2022 - 25 taps on bags / 8 taps on 3/16's line - late start
I find this link is the google search, which just talks about fittings coming loose
http://mapletrader.com/community/arc...hp/t-9790.html
thankyou
230ish taps on double Guzzler vacuum 25-27" Hg with two sap ladders
Try this - difference between 20p and 30p maple tubing information. It should take you right to the mapletrader discussion about the tubing. Select the Mainline Density - Maple Trader.com
2004 - 2012 2x3 flat pan 25 to 60 taps
2012 2x3 new divided pan w/draw off 55 taps
2018 - didn't boil surgery - bought new evaporator
2019 new SML 2x4 raised flue high output evap. 65 taps
made 17 gal. syrup
2020 - only put out 53 taps - made 16.25 ga.l syrup
2021 - Didn't work out
2022 - 25 taps on bags / 8 taps on 3/16's line - late start
Posting Permissions
Reply With Quote