+ Reply to Thread
Results 1 to 3 of 3

Thread: Rebuilding Onto Existing Concrete Foundation

  1. #1
    Join Date
    Jun 2014
    Location
    Albany, Vermont
    Posts
    102

    Default Rebuilding Onto Existing Concrete Foundation

    I'm in Albany, VT.

    I have a 40' X 80' concrete foundation, in great shape, that used to be an equipment shed. The shed roof collapsed a number of years ago so the foundation, with a dirt floor, is the only thing left.

    I'm envisioning the foundation could be used as the base for a sugar shack that would have solar on the south facing roof. I'm thinking the sugar shack could be built in phases over a few years with the 1st phase being the uprights, rafters and metal roof for a 40' wide X 24' long section. This would allow enough room to setup an evaporator, perhaps in 2023, and boil. I would also store and dry firewood in this section.

    Any advice on timber framing or stick built, DIY building, plans...will be greatly appreciated.
    2023 - 2' X 6' Smoky Lake Products "Silverplate" evaporator + Increase taps up to 500
    2022 - 295 Sap Sak taps - Sold sap.
    2017-2021 - Didn't tap.
    2016 - 150 Sap Sak taps - Sold sap.

    https://www.larrybohenwebsolutions.com

  2. #2
    Join Date
    Jan 2017
    Location
    Williston, VT
    Posts
    616

    Default

    There's lots to think about but you should have plenty of room!

    If you're serious about a timber frame structure then you should contact Jim Giroux from Vermont Frames in Starksboro, VT. Jim is a sugar maker over here in Richmond.

    Regardless of what you do, I would recommend a concrete floor, with a drain.

    Good luck.

    Ken
    Ken & Sherry
    Williston, VT
    16x34 Sugarhouse
    1,500 taps on high vacuum, Electric Releaser & CDL Sap Lifter
    Wood-Fired Leader 30"x10' Vortex Arch & Max Raised Flue with Rev Syrup Pan & CDL1200 RO
    https://www.facebook.com/pumpkinhillmaple/

  3. #3
    Join Date
    Mar 2005
    Location
    Albion PA
    Posts
    5,099

    Default

    Orange again,
    The foot print is big! Maybe do 40 x 40 with 20 x 40 as the sugarhouse and the rest storage?
    Cost is also a factor.
    Good luck with your project!
    Regards,
    Chris
    Last edited by Sugarmaker; 02-05-2022 at 07:55 AM.
    Casbohm Maple and Honey
    625 roadside taps + Neighbors bring some sap too!
    3x10 King, WRU, AOF and AUF
    12" SIRO Filter Press.
    2015 Ford F250 PSD sap hauler
    One Golden named Maggie, Norwegian Forest Cat named Lucy
    Too many Cub Cadets
    Ford Jubilee and several Allis WD's, and IH tractors
    1932 Ford AAB ton and a half, dump truck

    www.mapleandhoney.com

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts