Bryan

Bode is ready to tap. But I will put him in my nightly prayers anyway.

Thanks for your offer on fittings. I did test my RO and to my utter surprise no leaks. I guess the threads are so small they seal pretty well with the tape. When I use larger polyvinyl on jet pumps I usually have leaks or crack the fitting trying to make them go away. Larger threads easier to leak ... even with tape ... I guess. Regardless I was in great fret I would be making a home sprinkler system instead of RO system.

Did have one small leak and it was the second temporary needle valve ( brass compression which I think was flawed ) at the permeate outlet only used in this test situation to build pressure in the membraneless system. The one at the waste line worked fine. Had a filter in the system and that was it. Tested at 100 PSI. Will probably run it a little higher with sap.

I hope its not one of those crazy sapless years now!