Suspending steamaway pan and stack
I'm curious to see what others have for pulley setups or hangers for their steamaway and hoods. I have a 3x8 steamaway pan on my 3x12 evaporator and feel like the 1/4" coated cable is a little overkill for the weight of it. Post pictures of what you have please, looking for ideas to make my setup easier. Long term I want to install I-beam with rollers and electric lift to lift then slide the steamaway over for cleaning.
2,000+ taps and growing
3'x12' Vortex, MAX flue, and steamaway
24'x48' timber frame sugarhouse
Simple set up we are using with SS cable and eyebolts and a boat winch.
ktd4Vlo1Ql6mBr8Pvmh44Q.jpg
2.5 x 8 Leader Reverse Fired with SS Preheater and Hoods new this year
About 400+- taps on 3/16 with vacuum
all coming into sugar house
Hoping to get to 600 taps this season
JR,
I have some pictures on here somewhere? Old post. You might try searching. I also use a hand crank boat winch and a rolling frame work to support the steamaway and or the rear pan and hood.
Humm these aren't very good. There is a frame not shown below the rails. Maybe I can find others?
Found them Just my 2 cents.
Regards,
Chris
Last edited by Sugarmaker; 01-07-2019 at 09:09 PM.
Casbohm Maple and Honey
625 roadside taps + Neighbors bring some sap too!
3x10 King, WRU, AOF and AUF
12" SIRO Filter Press.
2015 Ford F250 PSD sap hauler
One Golden named Maggie, Norwegian Forest Cat named Lucy
Too many Cub Cadets
Ford Jubilee and several Allis WD's, and IH tractors
1932 Ford AAB ton and a half, dump truck
www.mapleandhoney.com
Posting Permissions
Reply With Quote
