snowing and cold: we wait
snowing and cold: we wait
Casbohm Maple and Honey
625 roadside taps + Neighbors bring some sap too!
3x10 King, WRU, AOF and AUF
12" SIRO Filter Press.
2015 Ford F250 PSD sap hauler
One Golden named Maggie, Norwegian Forest Cat named Lucy
Too many Cub Cadets
Ford Jubilee and several Allis WD's, and IH tractors
1932 Ford AAB ton and a half, dump truck
www.mapleandhoney.com
Had to repair a mainline wire today. I found the loop around the end tree that holds the ratchet tensioner broke. The funny thing is I figured that it would break at the THERON SQUARE KNOT but nope, it broke where the wire went thru the tensioner.
This mainline is where it goes over a right a way so it is 15' in the air. I guess those trees must have gotten swaying yesterday when we had all that wind.
1st Generation Hobby Maple Producer, you got to start somewhere.![]()
222 Taps, all on Vacuum! No more buckets.
Lapierre 2'x5' raised flue w/Hood and Preheater
Surge SP11, Lapierre Hobby Releaser
Modified 5" Filter Press made by Daryl with a Gear Pump
Homemade 2 membrane RO
Kabota RTV Sap Hauler
Hardy's Maple Syrup on Facebook
Dennis
I`ve had the same problem and your right it`s from the tree swaying.We fixed the wire a few times before we decided to top the tree.
TWO OLDS SAPS SUGAR WORKS
with a little help from our freinds
2300 on vac,5x14 grimm lighting,pre heater,900 gph ro www.twooldsaps.com
Well Im at school and the report from home is 13 inches of snow on the ground. Our big fourwheeler with the 35 gallon tank on it crapped the bed while dad was plowing with it this morning.....great!!!Looks like ill be using the old international scout to plow the trails out in the woods when i go home wednesday.
2017
7,000 high vac taps
6x16 leader evap
2200 GPH Lapierre Turbo RO
2400 GPH Springtech RO
To many tanks to count
www.waysidemaplefarms.com
http://s1116.photobucket.com/albums/k578/waysidemaple/
this is the first year i jumped on the tapping band wagon and it will be the last year from now on i will be sticking to my guns only thing i made with the 150 gallons of sap i got last week was a dirty evaporator
Boyd
750 taps on vacuum
150 taps on gravity
122 buckets
250 gph homemade ro
3x8 raised flue pans on a homemade air over arch
hoods and preheater
my biggest fear is when i die my wife will sell my sugaring stuff for what i told her i payed for it
http://s367.photobucket.com/albums/oo112/jrthe3/
Boyd,
Glad to see your enjoying the early runs too! NOT!
Well I have a good reason, I need to get some syrup for open house. But I may lose a good week at the end of the seasonTime will tell. Hang in there. Good news is, your tapped!
SM
Casbohm Maple and Honey
625 roadside taps + Neighbors bring some sap too!
3x10 King, WRU, AOF and AUF
12" SIRO Filter Press.
2015 Ford F250 PSD sap hauler
One Golden named Maggie, Norwegian Forest Cat named Lucy
Too many Cub Cadets
Ford Jubilee and several Allis WD's, and IH tractors
1932 Ford AAB ton and a half, dump truck
www.mapleandhoney.com
Update from Pierce and Sons- Last week was a real stuggle down here for us but things are starting to come together. Still tapping so couldnt get the vac where I want it yet. Id tap at night when it was froze and chase the heavy leaks in the days when it thawed. The sap did run surprisingly good for a couple days for such early sap. Got around 7000 gallons I think. Some of the first of it real thin then got better. All the while were hooking up stuff in the shed. Found that my newer cdl machine had a bad high pressure pump so had to process all the sap with the older machine which worked great. We really like the evaperator a lot. Very easy to operate. We ran it at about half throttle to get the hang of it with 8% sap and we both agreed next batch were going to take it to 12%. The piggyback developed a leak at a float box that had been patched. We drained it and decided not to use it. It will be easy to fix but need to lift it off the evap to do it and dont want to mess with it. I think Ill probly sell it and just use my ro equipment. Ended up making a 55 drum of dark syrup and theres probly a drum plus in the evap so Im really happy and figure were off to a good start. Gonna finish my last bush on the ring pump tomarrow night and then I have two 400 tap dairy pump bushes to do and Im ready to get the vacs where I need them. All in all Im pretty pumped about the year and I think its going to be a good one. Everybody better get ready Its almost go time everywhere now. Also, lost 8 pounds in 8 days, Weighed myself this morning. Looking pretty buff. Theron
Spent the weekend cleaning up wind damage and fixing a couple af leaks throughout the bush. Got everything nice and tight now but weather looks cold for a while still. Didnt need the 10 inches of snow we got again Sunday night, it was just starting to get walkable in the woods after a few days in the 50's. Yet to hang remainder of buckets, hoping for a later season this year since we susually fininsh up first week in April and no decent weather in sight in the 10 day forecast.
CDL 2x8
Around 4000 taps
Polaris ATVs, Ski Doo snowmobiles to get around
Atlas Copco pumps
Lapierre two post RO
http://s272.photobucket.com/albums/j...Sugar%20shack/
5,000 Taps on vacuum
9,400 gallons storage
3 tower CDL RO
3.5'x14' Lapierre Force 5
10" CDL Wesfab Filter Press
Twitter & Instagram: @ennismaple
www.ennismaple.com
spent to much time in my buddies woods and not enough in mine, helped him tap, and he got to boil on friday while i was still tapping, only have 421 out of 700 in but ive got alot to do yet before i can even think about boiling any hoo so i gues it was a good thing i didnt get tapped, hopping to brush the rust out of the tank in the big woods, and stick the lines in on thursday and let it fill, that load will probably go to my buddies since im not ready to prosses it. way to much to do!
Dan O'Shaughnessy
2007 jd5203
Husqvarna 61, (2)Husqvarna 272XP, 23 and finally getting back into it after 2 long years away
DanO