|
|
#11
06-17-2010, 09:02 PM
|
|||
|
|||
The reciculation pump is inside the collum. And as Thompson said it keeps the membrane from clogging up. It has high pressure on both sides of it so it doesn't need a big motor like the high pressure pump needs.
Keith 
|
|
#12
06-20-2010, 12:27 AM
|
|||
|
|||
|
alittle thick but im getting there
ok again im asking cause i dont understand he is using another external pump a webtrol if i rember and plumbing it into the towers now on a budget and keeping in mind im looking at 300 gal or so tops could i put a barb fitting off the main feed with a valve comming off the procon pump plumbed to the tower in the same manner and be as effective or somewhat as a recirculing pump i know im not running the high presure but u can get250 psi out of a procon pump andif that works to recirculate i should be done by the time i would need to rinse?yes no maybe with single tower
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
