posted this last winter with no suggestions and looking to revisit it for next year.

I have a flat piece of woods about 50yds wide and 125yds long, probably 50-60 taps be in it. What's the best way to go about it with a 4008 Shurflo on a manifold?

Can I just run some lengths of 5/16 direct to the manifold? If so how many taps per line?

I don't have any 3/16 line or tools, but if the consensus is the best way I can look into it.

or would a 3/4 mainline line be the best way to go?

Thanks fellas.