Another thing is that you say you loose vacuum going up the long mains. How long and how many taps are you talking. For 3/4" I think the max is supposed to be 1000' and I personally think 750' but that's just my opinion. There is also a max number of taps but I forget what that is, someone will chime in on that. If you use 1" mains you can go farther, but I don't have the tubing notebook at hand so I'm not sure how far of how many taps.
Dave Klish, I recently bought a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
Posting Permissions
Reply With Quote