Results 1 to 10 of 27

Thread: Homebuilt RO with 400gpd membranes

Threaded View

  1. 02-21-2018, 07:03 PM #1
    DaveB
    DaveB is offline Maple Addict DaveB is on a distinguished road
    Join Date
    Dec 2007
    Location
    Ashford, CT
    Posts
    946

    Default Homebuilt RO with 400gpd membranes

    I decided to bite the bullet and build myself an RO system because of the tsunami of sap I'm getting. I've ordered a bunch of parts based on the homebuilt systems that others have built but I think I ordered a couple of mis-matched components. I saw that people were using 400gpd membranes so that's what I ordered and I also ordered housings that I thought went with the membranes but that was not the case. So, now I have these 400gpd membranes that are 3" wide and 2.5" membrane housings. I can order a 3" housing for the membrane but I'm wondering if there is a 2.5" 400gpd membership. My question is, what are people using for 400gpd membranes and housings? Should I get the proper housing or a different membrane?
    Last edited by DaveB; 02-21-2018 at 07:17 PM. Reason: added links to what I'm building and ordered.
    300 and growing taps
    2'x6' air tight arch
    Building a new sugarhouse in Ashford, CT
    My YouTube Channel: https://www.youtube.com/c/CapturedNature
    My eBook: Making Maple Syrup in your Backyard
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules