Hey all!
I have a 2x6 drop flue rig that's going to produce lots of vapor and it's located in a 10x20 steel-roofed shed with a 12-12 pitch. The shed is open on all 4 sides and has 9' tall walls.
Q1.Without hoods, will there be excessive condensation dripping all over everything including into the pans?

I have a scorched 4x6 syrup pan that I was thinking of inverting and suspending as a hood over the rig and fitting with some round, galvanized, 8" ductwork to function as vapor stacks.
Q2. How many of these 8" stacks should I install into my "hood" to vent the vapor from a 2x6?
Q3. Will I get adequate draft if the stacks have 2-90' bends if I get at least 12' overall height?
Q4. Will the "hood" vent adequate vapor if it is flat rather than peaked?

Thanks!