Just put a splice in before the twisted saddles and turn that whole section of pipe back so the saddles are facing up. Next year if it does it again just twist splice around again.
I like that idea except when stuff freezes up. I have a splice near my releaser. The ice in the main wont pass through the splice, and as slush is drawn down the main, it gets caught at the splice, and plugs the line untill it finally melts
3x12 drop flue.
1000 taps on 24 inches of vacuum, and 200 buckets.
Bought a used springtech 500 GPH RO
Shooting for 29" of vacuum, less than 5 taps per line, and 2 quarts per tap. https://www.facebook.com/pages/Lown-...4713586?ref=hl