+ Reply to Thread
Results 1 to 5 of 5

Thread: Annual Meeting

  1. #1
    Join Date
    May 2006
    Location
    Chaplin, Connecticut
    Posts
    303

    Default Annual Meeting

    The MSPAC annual meeting is being held Sat. Nov. 6, 2010, in the Young Bldg. on the UConn campus. Meeting starts at 9 with a panel discussion to follow.
    Learn about the latest in the world of maple.
    2 1/2 X 8 Leader revolution pans on an inferno arch with steamaway. 1500 taps, 600 gph Springtech RO, 3 vacuum systems (3/4 hp. Airablo, 2 hp. Tuthill oilring pump and a 2 hp. Busch claw pump)
    http://www.flickr.com/photos/batsofbedlam/

  2. #2
    Join Date
    May 2006
    Location
    Chaplin, Connecticut
    Posts
    303

    Default

    Tim Wilmot, from the Univ. of Vermont Proctor Maple Research Center was our guest speaker. He was really good with a lot of useful information for syrup makers at any level.
    If you missed it, you missed a really good day. His presentation was followed by a panel discussion answering numerous questions.
    Gary Graham, Ohio State Univ., will be the speaker at out Jan. 8, 2011 meeting.
    2 1/2 X 8 Leader revolution pans on an inferno arch with steamaway. 1500 taps, 600 gph Springtech RO, 3 vacuum systems (3/4 hp. Airablo, 2 hp. Tuthill oilring pump and a 2 hp. Busch claw pump)
    http://www.flickr.com/photos/batsofbedlam/

  3. #3
    Join Date
    Jul 2007
    Location
    ct
    Posts
    187

    Default annual meeting

    thanks bats and the rest of the mspac for a great meeting. the talk given by dr tim and the panel was very informative.
    Browndog Maple
    shared sugarshack w/ a 2x6
    tapping mostly reds
    1 gsp/lab pup
    http://www.flickr.com/photos/1275328...hoto1324880183
    http://www.facebook.com/#!/pages/Bro...68487293166877

  4. #4
    Join Date
    May 2009
    Location
    UVM Proctor Maple Research Center, Underhill Ctr, VT
    Posts
    4,587

    Default

    Quote Originally Posted by ctjim View Post
    thanks bats and the rest of the mspac for a great meeting. the talk given by dr tim and the panel was very informative.
    Hi Folks,

    Just for clarification sake, there are two "Tim's" at the UVM Proctor Maple Research Center.

    Tim Wilmot (M.S.) is a UVM Maple Extension Specialist. His primary job responsibility is for outreach, although he also conducts some research. His office is at the UVM Proctor Maple Research Center.

    Tim Perkins (Ph.D), or "Dr. Tim" here on the Trader, is the Director of the UVM Proctor Maple Research Center. My responsibilities are in administering the UVM maple research program, supervision of the UVM PMRC employees, and research. My office is also at the UVM Proctor Maple Research Center.

    The "Tim" attending the MSPAC meeting on Saturday was Tim Wilmot, "Mr. Tim".
    Last edited by DrTimPerkins; 11-09-2010 at 07:10 AM.
    Dr. Tim Perkins
    UVM Proctor Maple Research Ctr
    http://www.uvm.edu/~pmrc
    Timothy.Perkins@uvm.edu

  5. #5
    Join Date
    Jul 2007
    Location
    ct
    Posts
    187

    Default

    Quote Originally Posted by DrTimPerkins View Post
    Hi Folks,

    Just for clarification sake, there are two "Tim's" at the UVM Proctor Maple Research Center.

    Tim Wilmot (M.S.) is a UVM Maple Extension Specialist. His primary job responsibility is for outreach, although he also conducts some research. His office is at the UVM Proctor Maple Research Center.

    Tim Perkins (Ph.D), or "Dr. Tim" here on the Trader, is the Director of the UVM Proctor Maple Research Center. My responsibilities are in administering the UVM maple research program, supervision of the UVM PMRC employees, and research. My office is also at the UVM Proctor Maple Research Center.

    The "Tim" attending the MSPAC meeting on Saturday was Tim Wilmot, "Mr. Tim".
    my apologies dr tim,i was under the assumption that both of the uvm tims had phd.
    Browndog Maple
    shared sugarshack w/ a 2x6
    tapping mostly reds
    1 gsp/lab pup
    http://www.flickr.com/photos/1275328...hoto1324880183
    http://www.facebook.com/#!/pages/Bro...68487293166877

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts