+ Reply to Thread
Results 1 to 1 of 1

Thread: Semi Permanent Pan Thermometer..

  1. #1
    Join Date
    Apr 2016
    Location
    SW Ontario
    Posts
    193

    Default Semi Permanent Pan Thermometer..

    Not sure how the big guys do it... but just throwing this out there, for the DIY guys... as it works pretty good for me.
    I wanted to install a decent thermometer in my syrup pan, but also wanted the opportunity to re-calibrate or check it at-will...
    I bought a long stemmed syrup dial thermometer, (about 8" long, I think) and thread it into an open ball valve on the pan....
    If I want to check the calibration in a boiling water pot, I un-thread it, and quickly pull it out and close the valve... (tiny bit of spill).
    PS - I take the handle off the valve once installed, so nobody accidentally damages the stem by trying to close the valve.
    Thermometer.JPG

    StatOut.JPG

    https://www.itm.com/pdfs/cache/www.i...-datasheet.pdf
    Last edited by wmick; 04-04-2019 at 11:46 AM.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts