+ Reply to Thread
Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Shurflo Surging.

  1. #11
    Join Date
    Jul 2012
    Location
    Lawrence County Ohio
    Posts
    353

    Default

    This was my 7th year with 12V diaphragm pumps. All shurflo 4008's now- started with everflo brand, but they just aren't as high quality or as good of a design. This surging, isn't a bad thing, it is usually the different rate of flow from the trees. I noticed it usually first thing when the trees thaw out and start running for the day, or the first day tapping. The replies about multiple lines are correct, but the perceived surging also comes from trees on one line not all producing the same amount of sap as they don't all start running at the exact same time. Each line, even with the same # of taps will have a different output due to each tree putting out more or less sap. I used to watch my pumps and think something was wrong. Aside from having leaks, or a bad diaphragm there's nothing wrong with it. The pump pulls and pulls and even though your gauge isn't consistent, you are applying vacuum to all of your taps. As far as recirculation goes, if your nearest tap is close or even uphill from your pump, the trees push up to 13PSI your diaphragms are goin to get wet pretty quick, and once wet, they will not dry out. The pump is more efficient with liquid than it is with air, but it is still much batter than gravity. With no leaks, and a properly functioning pump, you will absolutely get more sap from taps on a pump than with buckets or bags whether you see it "surging" or not.
    Last edited by bmbmkr; 03-26-2023 at 09:49 AM.
    '12 15 jugs - Steam pans
    '17 125 3/16 - 18" x 72" drop flue on homemade arch
    '18 240 3/16 - Deer Run 125
    '19 450 3/16 - Converted RO to electric/added a membrane
    '20 600 3/16 - Maple Pro 2x6 Raised Flue, added AOF/AUF
    '21 570 3/16 - Built steam hood, Smoky Lake filter press
    '22 800 3/16 - Upgraded RO to 4 4x40
    '23 500 3/16 - Re-plumbed RO, new "Guzzler"
    '24 500 3/16 - Steam Away, DIY 8x40 RO

  2. #12
    Join Date
    Feb 2017
    Location
    Red Bay Ontario
    Posts
    191

    Default

    All my lines and taps are above my pumps and some not very far away. I still found that on slow days or early and late in the day that the recirculation line kept me pulling a solid -25. Without it I’d get multiple lines having more air/gas then sap enter the manifold at the same time and get a bit of a stall. If that happens a lot I’d only hold around the -20 mark. Just the way my system seems to work but it sounds like a recirculation line would at least keep the original posters pump moving liquid. He stated it stopped pumping for a couple min and then if would start again. I’ve never had that unless it wasn’t getting sap. I think this is more his issue then the surging. Before I had the recirculation line I would get this but only loose my flow for a few seconds then it would start to pee out again. I also couldn’t get it to even -20 when that was happening. I also now can let my lines freeze up and my pump can still run without freezing till I shut it down. I find I don’t get the back pressure of sap going back into my lines when I do this. Or at least it minimizes it as much as possible.
    225 taps 180 on vac 45 on natural gravity lines.
    2x6 drop flue with auto draw.
    Home built 3 x400gpd ro
    2017 kubota M7060hdcc12
    2019 can am defender


    2017- first year 80 taps 22x36 home made arch and pan.

  3. #13
    Join Date
    Mar 2012
    Location
    Merrill, WI
    Posts
    41

    Default

    Got caught up in the season quickly and didn’t have a chance to add my recirc line until today. Will be anxious to try it next year. Thanks everyone!
    2012 3 1/2 gallons on a block arch. 25 buckets.
    2017 44 gallons on a Homemade 2x6 arch. 170 taps all on 3/16" tubing.
    2019 62 gallons on 200 taps on 3/16” tubing.

  4. #14
    Join Date
    Mar 2008
    Location
    West Falls, NY
    Posts
    269

    Default

    I’m really thinking about building one of these set ups this season. Would someone be willing to post a link to a specific shurflo 4008 pump? There are several models that start with 4008 - … but then have different model numbers after the 4008. And the prices vary considerably.

    Also, in Looking for a dc power supply, what kind of current draw are folks seeing or designing for with these pumps?
    Sugaring since 2000.
    2022 - 113 taps on tubing and gravity. Homemade wood fired evaporator and homemade RO.
    2023 - 120 taps on 5/16 and gravity added a float to the pan. built a new 5x400gpd RO. Still use the old one too!
    2024 - 125 taps still on 5/16 tubing and gravity, two home made ROs.

  5. #15
    Join Date
    Feb 2019
    Location
    Murrysville, Pennsylvania
    Posts
    507

    Default

    4008-101-A65 / E65 is the pump you want.

    Max current they draw is 7.5 AMPS. You will want a 10 AMP 12 VDC power supply.
    D. Roseum
    www.roseummaple.com | https://youtube.com/@roseummaplesyrup
    ~112 taps on 3/16 custom temp controlled vacuum; shurflo vacuum #2; custom nat gas evap with auto-drawoff and tank level gas shut-off controller; homemade RO #1; homemade RO #2; SL SS filter press
    ~30 gallons / year

  6. #16
    Join Date
    Mar 2008
    Location
    West Falls, NY
    Posts
    269

    Default

    Quote Originally Posted by DRoseum View Post
    4008-101-A65 / E65 is the pump you want.

    Max current they draw is 7.5 AMPS. You will want a 10 AMP 12 VDC power supply.

    Anything tricky about lengthening the leads on the temp sensors? It would help if they were about a foot longer. I’m hoping I can just splice a similar gauge wire in between the plug and the sensor and shrink tube it for insulation
    Sugaring since 2000.
    2022 - 113 taps on tubing and gravity. Homemade wood fired evaporator and homemade RO.
    2023 - 120 taps on 5/16 and gravity added a float to the pan. built a new 5x400gpd RO. Still use the old one too!
    2024 - 125 taps still on 5/16 tubing and gravity, two home made ROs.

  7. #17
    Join Date
    Feb 2019
    Location
    Murrysville, Pennsylvania
    Posts
    507

    Default

    Only thing I can think of is a longer wire adds slightly more resistance. A lower gauge wire (larger diameter) will minimize that. No idea how much it might impact the readings, but i assume for only adding a short distance it would be pretty minor, and you can recalibrate it at freezing as well.
    D. Roseum
    www.roseummaple.com | https://youtube.com/@roseummaplesyrup
    ~112 taps on 3/16 custom temp controlled vacuum; shurflo vacuum #2; custom nat gas evap with auto-drawoff and tank level gas shut-off controller; homemade RO #1; homemade RO #2; SL SS filter press
    ~30 gallons / year

+ Reply to Thread
Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts