4 x 40 Pump Motor Sizing
Looking to build a 4x40 single post RO with the option for a second membrane in the future.
My research suggests I should go with a 330 Procon and a 1.5 hp motor. The issue I’m having is the lack of access to 220v power. Running at 110v requires around 15 amps and leaves very little for a feed pump.
Can I use a 3/4 or 1 hp motor to power the Procon for the time being and upgrade to the larger motor in the future. I’ve seen 3/4 motors power a single post without an issue, just not sure if it’ll work with the larger pump without a second membrane.
Thanks.
2018 - 20 Taps on 3/16, Barrel evaporator with 2 steam pans. Unknown amount.
2019 - Nothing
2020 - 30 Taps on Shurflo, 30 taps on 3/16, 2x5 oil tank evaporator, 11 Gallons.
2021 - 35 Taps on Shurflo, 11 buckets, RB10 RO Bucket, 2x3XL Mason Evaporator. 4 gallons
2022 - 110 Taps on Shurflo, 77 taps on 3/16 gravity, 13 buckets to hit 200, Upgrade to RB15 RO Bucket.
2023 - 110 Taps on Shurflo, New 3/4 Mainline with 125 taps, 2x4 raised flue, Upgrade to Homemade 4x40 RO.