Originally Posted by
Gr8dad
I only recently learned of the use if a shurflo diaphragm pump to create vacuum on 3/16 lines. Now I learn this is in widespread use.
1. What can I expect for increased yield by properly using this system.
2. Any advice instructions or diagrams for properly wiring and plumbing this system would be appreciated. I intend to run 2 off of 12v deep cell car batteries.
Thanks.
I'm lazy. I plumb the 1/2" npt threads of the pump to a simple strainer and then to a piece of 1" mainline with a couple saddles and a 6-way star fitting. I make some 2 wire extension cords and hook them to whatever car battery I have handy. I run about 4-500 feet of extension cord and hook up a battery charger to the battery. Works great. I leave my pumps on 24/7 during the season.
I've been right around .6 gallons per tap every year since I started using them. About double our previous number.
-Ryan
Went off the deep end. Might be in over my head...