I just bought a brand new 12x18 lapierre releaser... it opens and dumps fine but the top slide won’t close after it’s finished dumping... any help would be great...
Lapierre Mechanical releaser...help?
I just bought a brand new 12x18 lapierre releaser... it opens and dumps fine but the top slide won’t close after it’s finished dumping... any help would be great...
2010 - 28 taps, homemade brick arch
2011 - 421 taps, 2' x 6' homemade evaporator
2012 - 276 taps
2013 - 385 taps, new 2' x 6'
2014 - 600 taps, new 7" short bank filter press
Problem...
They are both single mechanical and there brand new so it’s not sugar build up or freezing temps...
2010 - 28 taps, homemade brick arch
2011 - 421 taps, 2' x 6' homemade evaporator
2012 - 276 taps
2013 - 385 taps, new 2' x 6'
2014 - 600 taps, new 7" short bank filter press
Got a picture?
600 taps on vacuum
Lapierre mechanical Releaser
CDL electric releaser
2.5 x 10 CDL Venturi ( new for the 2024 season )
Home made modulating auto draw off
Homemade RO 2 x 4" membranes
CDL 16 x 16 bottler
Wesfab 7" filter press
Delaval 73 vacuum pumps
12 hives of bees
I have a video but not sure how to post it here... could I text you?
2010 - 28 taps, homemade brick arch
2011 - 421 taps, 2' x 6' homemade evaporator
2012 - 276 taps
2013 - 385 taps, new 2' x 6'
2014 - 600 taps, new 7" short bank filter press
What is your vacuum pressure at the releaser?
Sure. I sent you a pm
600 taps on vacuum
Lapierre mechanical Releaser
CDL electric releaser
2.5 x 10 CDL Venturi ( new for the 2024 season )
Home made modulating auto draw off
Homemade RO 2 x 4" membranes
CDL 16 x 16 bottler
Wesfab 7" filter press
Delaval 73 vacuum pumps
12 hives of bees
Pressure
Been. Running...21-23
2010 - 28 taps, homemade brick arch
2011 - 421 taps, 2' x 6' homemade evaporator
2012 - 276 taps
2013 - 385 taps, new 2' x 6'
2014 - 600 taps, new 7" short bank filter press
ensure that your vac line to the slide is sitting ‘square in’ in the slide elbow, ive noticed sometimes an unsquare fit up creates a binding or full slide, also perhaps you could back off the screw asserting pressure to the slide plate
hope that helps
Make sure the slide is lubricated. Easy to do and helps. It should handle 21-23" no problem.
Josh
2009 - 370 on vac. & 16 buckets
2010 - 377 on vac.
2011 - 590 on vac.
2012 - 620 on high vac., 170 buckets, 110 on gravity tubing
2013 - 830 mine + 800-1000 others
2014 - 870 mine + 800-1000 others
2017 - 920 mine + 500-700 others
2018 - 902 mine + 500-700 others
2019 - 902 mine + 700 others
2020 - 902 mine + ???? others
Atlas Copco Pump
2.5'x8' 802maple Special with Dallaire pans
H2O Innovation 600gph RO
Spring Harvest Website
Also, look at the tubing connecting the mechanisms for any liquid in them. Even a small about can stop the releaser from working.
I had about a 1" column of liquid in one line, and I had the same problem.
Jeff Emerson
www.emersonsmaplehill.com
3x12 Leader with over air, custom piggyback, 600gph CDL RO
2500 on 25" vacuum
350 4 wheeler, 500 snowmobile, and 1950's Ford 600 tractor, Husqvarna! (261, 372xpBigBore, 562xp), Stihl MS193 for in tree work
Posting Permissions
Reply With Quote