Just went and hook up 4008 pump. And I hear it click for it to come on but nothing happens? This would be third season could it be seized?
Just went and hook up 4008 pump. And I hear it click for it to come on but nothing happens? This would be third season could it be seized?
110 taps W.F Mason 2x3 and two turkey friers for finishing
2011 expanding to a Mason 2x4 with a blower increasing taps to about 200
2011 Hurricane Irene rips thru my small sugar bush cost me to lose 20% of taps
2014 I have reworked my lines for 2014
32 taps on 5/16 line with check valves
57 taps on 3/16 line with check valves
55 buckets with total tapped trees of 144
Run some warm water in it, then try again. Most likely the diaphragm is just stuck. You may want to run hot water in both ends, let set a minute or so, dump it, turn pump over and repeat on the other end. Then hook it back into your system.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
Will try thanks
110 taps W.F Mason 2x3 and two turkey friers for finishing
2011 expanding to a Mason 2x4 with a blower increasing taps to about 200
2011 Hurricane Irene rips thru my small sugar bush cost me to lose 20% of taps
2014 I have reworked my lines for 2014
32 taps on 5/16 line with check valves
57 taps on 3/16 line with check valves
55 buckets with total tapped trees of 144
Might be something in the pump too.... They are easy to pull apart to see what is going on...
220 Taps
2x6 Home made
Sap Shack 20x20
5 Shurflo diaphragm pumps
250 GPH Deer run RO