+ Reply to Thread
Results 1 to 10 of 10

Thread: Using an old pressure tank for sale?

  1. #1
    Join Date
    Feb 2015
    Location
    Saratoga, NY
    Posts
    426

    Default Using an old pressure tank for sale?

    Any reason I wouldn't be able to use this old, bladder-less well pressure tank as a head tank for my sap setup? It's 80 gallons!

    Screenshot_20210304-081245.jpg
    --
    2015: 8 bucket taps (7 red, 1 sugar) on DIY barrel evaporator
    2016: 13 taps (bucket and tube) on block arch and hotel pans
    2017: SAME
    2018: 25 taps on 2x3 flat pan and resurrected barrel arch
    2019: 25 taps...same setup plus DIY 3x150gpd RO filter
    2020: 50 taps, all buckets..."new" oil tank arch setup
    2021: 100 taps (50/50 buckets/3-16 tubing) on 2x4 divided pan
    2022: 150 taps (50/100 b/t) on 2x4 pan with sap warmer pan
    2023: SAME
    2024: 150 taps, added single-post 4x40 RO system

  2. #2
    Join Date
    Jan 2017
    Location
    Williston, VT
    Posts
    615

    Default

    I like a tank that I can see inside of and clean easily.
    Ken & Sherry
    Williston, VT
    16x34 Sugarhouse
    1,500 taps on high vacuum, Electric Releaser & CDL Sap Lifter
    Wood-Fired Leader 30"x10' Vortex Arch & Max Raised Flue with Rev Syrup Pan & CDL1200 RO
    https://www.facebook.com/pumpkinhillmaple/

  3. #3
    Join Date
    Jan 2006
    Location
    Oneida NY
    Posts
    11,564

    Default

    That likely has rust inside. Besides the head tank should be cleaned daily, how would you be able to clean it?
    Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
    Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
    Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
    After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.

  4. #4
    Join Date
    Jan 2011
    Location
    Southern Ohio
    Posts
    1,349

    Default

    Your better off finding a used plastic 55 gallon barrel. There are places that sell them pretty cheap and you can find ones used for food products. I used to get barrels from a wine bottling place and most still had some wine in them. They cleaned easy and I felt good about their safety. Most of them had a liner in them.
    125-150 taps
    Smokey Lakes Full pint Hybrid pan
    Modified half pint arch
    Air over fire
    All 3/16 tubing
    Southern Ohio

  5. #5
    Join Date
    Feb 2015
    Location
    Saratoga, NY
    Posts
    426

    Default

    Quote Originally Posted by buckeye gold View Post
    Your better off finding a used plastic 55 gallon barrel. There are places that sell them pretty cheap and you can find ones used for food products. I used to get barrels from a wine bottling place and most still had some wine in them. They cleaned easy and I felt good about their safety. Most of them had a liner in them.
    I agree but I'm having a helluva time finding them around here and to order them it costs more to ship them than the actual cost of the barrel.

    I'll keep searching!
    --
    2015: 8 bucket taps (7 red, 1 sugar) on DIY barrel evaporator
    2016: 13 taps (bucket and tube) on block arch and hotel pans
    2017: SAME
    2018: 25 taps on 2x3 flat pan and resurrected barrel arch
    2019: 25 taps...same setup plus DIY 3x150gpd RO filter
    2020: 50 taps, all buckets..."new" oil tank arch setup
    2021: 100 taps (50/50 buckets/3-16 tubing) on 2x4 divided pan
    2022: 150 taps (50/100 b/t) on 2x4 pan with sap warmer pan
    2023: SAME
    2024: 150 taps, added single-post 4x40 RO system

  6. #6
    Join Date
    Mar 2008
    Location
    Lake County Ohio
    Posts
    1,630

    Default

    Quote Originally Posted by ADK_XJ View Post
    Any reason I wouldn't be able to use this old, bladder-less well pressure tank as a head tank for my sap setup? It's 80 gallons!

    Attachment 22117
    From the picture, it looks like it's upside down and has a drain and 3 legs. If so, turn it over, cut the top off, look inside and see what you have.
    If it's rust free, you might be able to make it work until you find a better tank and it'll be easy to clean with no top...
    John Allin

    14x18 Hemlock Timber Frame Sugar House 2009
    Leader 2x6 w/Patriot Raised Flue Pan 2009
    Leader Steam Hood 2014 - Clear Filter Press 2015
    Leader Revolution Pan and SS Pre-Heater 2016
    CDL Hobby RO & Air Tech L25 Hi Vac Pump 2019
    06' Gator HPX to collect wood & sap
    14' Ski-Doo Tundra for winter work in the woods
    Great Family 3 grown kids+spouses and 7 grand kids who like the woods
    7th Gen Born in Canada - Raised in Chardon Ohio - Maple Capital of the World..<grin>.

  7. #7
    Join Date
    Jan 2006
    Location
    Oneida NY
    Posts
    11,564

    Default

    How much would it cost you to drive to Oneida, NY? I have a few 30 gal food grade plastic tanks, you can have some at $10 ea.
    Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
    Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
    Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
    After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.

  8. #8
    Join Date
    Feb 2015
    Location
    Saratoga, NY
    Posts
    426

    Default

    Quote Originally Posted by johnallin View Post
    From the picture, it looks like it's upside down and has a drain and 3 legs. If so, turn it over, cut the top off, look inside and see what you have.
    If it's rust free, you might be able to make it work until you find a better tank and it'll be easy to clean with no top...
    Thanks, that was my plan exactly and, if it is rusty, I'll use it to collect rainwater in the summer to water the garden that's too far from the house taps.
    --
    2015: 8 bucket taps (7 red, 1 sugar) on DIY barrel evaporator
    2016: 13 taps (bucket and tube) on block arch and hotel pans
    2017: SAME
    2018: 25 taps on 2x3 flat pan and resurrected barrel arch
    2019: 25 taps...same setup plus DIY 3x150gpd RO filter
    2020: 50 taps, all buckets..."new" oil tank arch setup
    2021: 100 taps (50/50 buckets/3-16 tubing) on 2x4 divided pan
    2022: 150 taps (50/100 b/t) on 2x4 pan with sap warmer pan
    2023: SAME
    2024: 150 taps, added single-post 4x40 RO system

  9. #9
    Join Date
    Feb 2015
    Location
    Saratoga, NY
    Posts
    426

    Default

    Quote Originally Posted by maple flats View Post
    How much would it cost you to drive to Oneida, NY? I have a few 30 gal food grade plastic tanks, you can have some at $10 ea.
    Oh really? Shoot - it's less cost and more time, I'm working like crazy right now and have two little kids so a half-day trip is at a premium.

    If you still have them come Spring, maybe I can pop out and stock-up? I really appreciate the offer.
    --
    2015: 8 bucket taps (7 red, 1 sugar) on DIY barrel evaporator
    2016: 13 taps (bucket and tube) on block arch and hotel pans
    2017: SAME
    2018: 25 taps on 2x3 flat pan and resurrected barrel arch
    2019: 25 taps...same setup plus DIY 3x150gpd RO filter
    2020: 50 taps, all buckets..."new" oil tank arch setup
    2021: 100 taps (50/50 buckets/3-16 tubing) on 2x4 divided pan
    2022: 150 taps (50/100 b/t) on 2x4 pan with sap warmer pan
    2023: SAME
    2024: 150 taps, added single-post 4x40 RO system

  10. #10
    Join Date
    Mar 2008
    Location
    Lake County Ohio
    Posts
    1,630

    Default

    Quote Originally Posted by ADK_XJ View Post
    Thanks, that was my plan exactly and, if it is rusty, I'll use it to collect rainwater in the summer to water the garden that's too far from the house taps.
    That's a good plan. If it's rusty maybe you can put a liner in it to get through this season.
    Oh, and enjoy those two kids...in a blink you'll turn around and be looking at their kids - who are much more fun by the way - ask me how I know. <big grin>
    John Allin

    14x18 Hemlock Timber Frame Sugar House 2009
    Leader 2x6 w/Patriot Raised Flue Pan 2009
    Leader Steam Hood 2014 - Clear Filter Press 2015
    Leader Revolution Pan and SS Pre-Heater 2016
    CDL Hobby RO & Air Tech L25 Hi Vac Pump 2019
    06' Gator HPX to collect wood & sap
    14' Ski-Doo Tundra for winter work in the woods
    Great Family 3 grown kids+spouses and 7 grand kids who like the woods
    7th Gen Born in Canada - Raised in Chardon Ohio - Maple Capital of the World..<grin>.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts