Was going pull the trigger on a ro bucket, but carl is backed up.
A friend sold me his 8800 pump(he is going bigger) and I ordered 3012 housings.
What membrane would be best for this, lots of choices but know idea which to buy ?
thanks in advance
Was going pull the trigger on a ro bucket, but carl is backed up.
A friend sold me his 8800 pump(he is going bigger) and I ordered 3012 housings.
What membrane would be best for this, lots of choices but know idea which to buy ?
thanks in advance
Contact MES and see if they offer that size. Whatever you get, you want ones made for maple sap, not just water.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
On MES web site looks like the bigger sizes is what they carry. I have found 200 gpd, thru 500 gpd membranes
probably will never have more than 150 gallons of sap going though at a time. Considering that should I go to say 400 gpd or use the lower size 200/300 gpd ?
If you plan on growing your sugaring experience, go with the higher output membrane.
Chad
2014: 12 taps, 5 gal buckets
2015: 15 taps on bags
2016: 150 taps: 100 on bags, 50 on 3/16" natural vac, 2x8 AUF/AOF Homebuilt Arch, 2x8 SL Drop Flu & Auto Draw, SL Propane Canner/Bottler
2017: 225 taps: Built Lean to, Added SL hood, preheater, concentric exhaust, SL SS 7" SB Filter Press
2018: 180 taps: Added Shurflo to 50 - 3/16", Auto fill sensor to head tank
2019: No tapping
2020: 175 taps
2021: 300 taps, homemade RO and releaser
2022: 600+ taps
I have 30 ro buckets in stock. Disappointed carl and dave didnt say anything.
Fred Ahrens
330-206-1606
Richards Ohio Maple Equipment
Ohio CDL sales rep
LaPierre Dealer
H&M maple fabricator Dealer
Service Tech/repair for all brands and electronics
don't take life too serious, nobody gets out alive anyways!
Hey Fred sorry we didn't know that! I will direct inquiries directly to you!
Last edited by carls47807; 02-22-2021 at 09:08 PM.