Was going pull the trigger on a ro bucket, but carl is backed up.
A friend sold me his 8800 pump(he is going bigger) and I ordered 3012 housings.
What membrane would be best for this, lots of choices but know idea which to buy ?
thanks in advance
Was going pull the trigger on a ro bucket, but carl is backed up.
A friend sold me his 8800 pump(he is going bigger) and I ordered 3012 housings.
What membrane would be best for this, lots of choices but know idea which to buy ?
thanks in advance
Contact MES and see if they offer that size. Whatever you get, you want ones made for maple sap, not just water.
Dave Klish about 400 taps, down from much more. Will hold about the same for 2021
2012 Mahindra 36 HP 4x4/ loader/cab/heat/AC:-)
3x8 raised flue evaporator
250 GPH converted to electric, RO by Ray Gingerich
6.32 KW solar system, 1.48KW is battery backed up, all net metered
website: www.cnymaple.com
On MES web site looks like the bigger sizes is what they carry. I have found 200 gpd, thru 500 gpd membranes
probably will never have more than 150 gallons of sap going though at a time. Considering that should I go to say 400 gpd or use the lower size 200/300 gpd ?
If you plan on growing your sugaring experience, go with the higher output membrane.
Chad
2014: 12 taps, 5 gal buckets
2015: 15 taps on bags
2016: 150 taps: 100 on bags, 50 on 3/16" natural vac, 2x8 AUF/AOF Homebuilt Arch, 2x8 SL Drop Flu & Auto Draw, SL Propane Canner/Bottler
2017: 225 taps: Built Lean to, Added SL hood, preheater, concentric exhaust, SL SS 7" SB Filter Press
2018: 180 taps: Added Shurflo to 50 - 3/16", Auto fill sensor to head tank
2019: No tapping
2020: 175 taps
2021: 300 taps, homemade RO and releaser
I have 30 ro buckets in stock. Disappointed carl and dave didnt say anything.
Fred Ahrens
330-206-1606
Richards Maple Products
Ohio CDL sales rep
dont take life too serious, nobody gets out alive anyways
Hey Fred sorry we didn't know that! I will direct inquiries directly to you!
Last edited by carls47807; 02-22-2021 at 10:08 PM.