Happened to see these in NE CT. Pretty cheap for someone wanting to build an oil tank boiler.
https://newlondon.craigslist.org/grd...276895776.html
Cheap Oil Tanks
Happened to see these in NE CT. Pretty cheap for someone wanting to build an oil tank boiler.
https://newlondon.craigslist.org/grd...276895776.html
Those tanks likely have leaks at the bottom, they would need to get welded by most likely welding a patch, near the holes the steel is likely very thin and oil soaked.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
I meant I saw these on CL for someone looking for a cheap oil tank to build an evaporator out of, as in what ADK_XJ has a few threads down from this one. Not to store anything in them.
I've seen a few evaporators built using oil tanks. Yes, I would imagine any oil tank would be oil soaked.
Posting Permissions
Reply With Quote