Gast 2567 Sucked up water
I was doing some testing on a homemade releaser and had the vacuum plumbed directly into the releaser without a sap trap. Of course, when I opened up the vacuum, the flow of water into the releaser got pretty violent and some water got sucked up the intake and dripped into the muffler jar. It's a dry vane vacuum pump so I could use a little help with what to do at this point. I shut it off and walked away hoping for some guidance from you on the forum. Thanks for the help.
Chad
2014: 12 taps, 5 gal buckets
2015: 15 taps on bags
2016: 150 taps: 100 on bags, 50 on 3/16" natural vac, 2x8 AUF/AOF Homebuilt Arch, 2x8 SL Drop Flu & Auto Draw, SL Propane Canner/Bottler
2017: 225 taps: Built Lean to, Added SL hood, preheater, concentric exhaust, SL SS 7" SB Filter Press
2018: 180 taps: Added Shurflo to 50 - 3/16", Auto fill sensor to head tank
2019: No tapping
2020: 175 taps
2021: 300 taps, homemade RO and releaser
2022: 600+ taps