+ Reply to Thread
Page 11 of 19 FirstFirst ... 2345678910111213141516171819 LastLast
Results 101 to 110 of 189

Thread: Tapping for 2021

  1. #101
    Join Date
    Feb 2016
    Location
    Peru, Maine
    Posts
    1,059

    Default

    Have fun Bryan, they’ll soak it up like a sponge. Took my granddaughter with me last year plowing the yard with the 4 wheeler for fun and just yesterday did it again and she ran the winch. Amazing what she remembered at 6 years old. Pretty soon they’ll be telling you what you did wrong while tapping
    305 taps on 2 Shurflo's, 31 taps on 3/16" and 229 taps on gravity. 565 in all
    Mountain Maple S3 controller for 145 of the vacuum taps
    2x6 Darveau Mystique Oil Fired Evaporator w/ Smoky Lake Simplicity Auto Draw
    Wesfab 7” filter press

  2. #102
    Join Date
    Nov 2019
    Location
    Hartford, CT
    Posts
    30

    Default

    If they can handle the drill safely, I’d let them drill. Or hold the drill with them. Most kids want to do, not watch. Worst case you’ll have a leaky tap.
    2019 LNG fired pot, 20 taps on 3/16, 10 buckets, gave it up after 3 gal.
    2020 New Mason 2x4 XL; 30 taps on 3/16

  3. #103
    Join Date
    May 2015
    Location
    Vermont
    Posts
    186

    Default

    I think getting kids involved is important. Probably let them hammer with supervision for this year. When they are old enough they can support a drill why not let them drill some with supervision. Yes it may lead to a yield loss on some taps because mistakes were make, but we are all human and have made a mistake before tapping (wait no I tap perfect every single hole every single time..... grin). Personally I would take a little yield losss and get the next generation involved and excited over the extra money. Have fun

  4. #104
    Join Date
    May 2009
    Location
    UVM Proctor Maple Research Center, Underhill Ctr, VT
    Posts
    6,420

    Default

    I have no problem letting kids help. I coached and later ran a youth program (as a volunteer) in Vermont for nearly 20 yrs that was very much "hands off" for adults https://www.odysseyofthemind.com/ and was involved nationally and internationally. Was pretty much my and wife's full-time volunteer job for a really long time. So I do understand the importance and happiness of teaching and letting kids do new things. So if sugaring is a hobby and you don't really care about losing a little sap, go for it. But if you're the "every drop is precious" type or making syrup for a living, drilling the taphole is one of the last jobs kids can do. Lug buckets, get firewood, tap in spouts (after instruction and initial supervision)....no problem. Drill tapholes....no.
    Dr. Tim Perkins
    UVM Proctor Maple Research Ctr
    http://www.uvm.edu/~pmrc
    https://mapleresearch.org
    Timothy.Perkins@uvm.edu

  5. #105
    Join Date
    May 2009
    Location
    Cheshire, CT
    Posts
    385

    Default

    I'm putting up my gravity lines tomorrow. I have help and I'll take it! The rest of the single trees will go in when 10 day looks promising. 3-4 more chances to snow here in southern CT this coming week...

    41.457 x -72.907 148 elevation
    2x4 wood fired evaporator with the "Hercules Blower"
    hybrid pan and backflip preheater by Smoky Lake
    103 taps. 44 on gravity
    All sugar Maples
    7" filter press
    10 x 12 sugar shack
    two very helpful kids
    a wife that thinks I'm nuts

    https://youtu.be/7MiY8qzBKk8
    https://www.wunderground.com/persona...d?ID=KCTCHESH7

  6. #106
    Join Date
    Feb 2017
    Location
    Connecticut
    Posts
    151

    Default

    I'd say let the kids drill their own tree and put a bucket on those trees and have them be responsible for collecting the sap from them. Or, if they can't be there, let them know how much sap they got. Just like having their own icefishing hole and tilt. Or a corner of the garden where they planted seeds and have to weed that section and watch the seeds grow in to vegetables. They love that stuff!! Heck, my girlfriend picked out a tree and drilled a tap hole when I went to get more buckets last year. She was texting me all the time wondering how HER tree was doing. I'd have to take a picture of the bucket so she could see it.

  7. #107
    Join Date
    Jan 2020
    Location
    Stirling ontario
    Posts
    222

    Default

    Quote Originally Posted by Gord View Post
    I'd say let the kids drill their own tree and put a bucket on those trees and have them be responsible for collecting the sap from them. Or, if they can't be there, let them know how much sap they got. Just like having their own icefishing hole and tilt. Or a corner of the garden where they planted seeds and have to weed that section and watch the seeds grow in to vegetables. They love that stuff!! Heck, my girlfriend picked out a tree and drilled a tap hole when I went to get more buckets last year. She was texting me all the time wondering how HER tree was doing. I'd have to take a picture of the bucket so she could see it.
    That's the way to do it!

  8. #108
    Join Date
    Jan 2020
    Location
    Connecticut
    Posts
    159

    Smile

    I tapped today!!!!

    Couldn't wait any longer - like an itch that you just have to scratch. 43 taps on tubing. We had to finish running some tubing - all new this year so not as simple as just tapping, as I made sure it was straight, tight, and downhill so this time, I don't have to replace it after only three years. It was so nice to hear the drip-drip-drip in the sap bin after we were done! I still have about 25 buckets to put up in two of my neighbors yards. Maybe tomorrow, but will have to check the weather first.

    Finally - the season has started!
    Last edited by therealtreehugger; 02-14-2021 at 05:26 PM. Reason: spelling
    2017 - 20ish taps on buckets, boiling outside in two baking pans
    2018 - 70+ taps, 14-buckets, 50+ on tubing, homemade arch from oil tank in my barn, 17 gal syrup
    2019 - same set up, 20 gal syrup
    2020 - less taps, short season, but RO kit was fantastic! 6 gal syrup and a maple cat!
    2021/22/23 - expanded into the neighbors yards! 50 taps on buckets and 40 taps on tubing

  9. #109
    Join Date
    Feb 2020
    Location
    Warren, Connecticut
    Posts
    14

    Default

    Worked on finishing up the mainline and installing drops this weekend. At the end of today I have 500' of 3/4" mainline tubing installed plus around 1500' of 5/16" lateral lines and about 82 drop lines installed. By the time the last few laterals and drops are installed next weekend I should have around 130-140 drop lines installed.

    Planning on tapping next weekend if the forecast stays steady.

  10. #110
    Join Date
    Mar 2019
    Location
    CT
    Posts
    247

    Default

    Tapped yesterday so that today's miniscule run could clear/rinse the lines.
    I'll start collecting tomorrow but not expecting too much in the next week.
    That said, the work is done, the vac is on, and I'm ready when the sap starts running!

    Feels good to have the work done, and now just letting the system do its work.
    2024 - 160 taps, Shurflo 4048. Sap Sucker 4-D. Mason 2x4 Raised Flue. 5x400 RO.
    2023 - 121 taps. Shurflo 4008. Sap Sucker 4-D. Mason 2x4 XL, 4x150 RO. 20 gallons.
    2022 - 103 taps. Shurflo 4008. Sap Sucker 4-D. Mason 2x4 XL, 4x150 RO. 23 gallons.
    2021 - 77 taps on Shurflo 4008. Sap Sucker 4-D. Mason 2x4 XL, 4x150 RO. 22 gallons.
    2020 - 70ish taps on Shurflo 4008. Mason 2x4 XL. DIY R.O. ~24 gallons.
    ______________________________________________
    Trout Brook Valley
    Weston, CT

+ Reply to Thread
Page 11 of 19 FirstFirst ... 2345678910111213141516171819 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts