That height will be no issue, but as Collins said, you must have a funnel suspended under the steam stack with a drain run to the hood gutters and then out. Any steam stack will get condensation running back down the inside, if you let that run back into the pans you lose much of the advantage of having a hood.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.