I don't find a pump performance curve in order to answer that, sorry. I googled for a pump curve but did not get one that would help, maybe others can find an answer for you. You might be able to just run a test, to see, if it will pump that high especially when the battery is not at full charge. If it will push thru a 3/16 or 5/16 line up a 35' rise (a larger line will have less line friction) while generating vacuum at the same time in a test it might work. However to push the 30 or 35' high without also creating vacuum might not help unless you have 2 pumps, one for vacuum, the second for push each on a separate battery.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.