+ Reply to Thread
Results 1 to 4 of 4

Thread: wesfab 7"press

  1. #1
    Join Date
    Nov 2008
    Location
    st.marys,pa.
    Posts
    63

    Default wesfab 7"press

    I've been trying to find a pressure gauge for a wesfab 7" filter press. Does anyone out there have any idea where I can buy one.

  2. #2
    Join Date
    Mar 2011
    Location
    North Grenville, Ontario
    Posts
    969

    Default

    I replaced the one in mine with a 0-100 psi pressure gauge from Home Depot. Works fine
    600 taps on vacuum
    Lapierre mechanical Releaser
    CDL electric releaser
    2.5 x 10 CDL Venturi ( new for the 2024 season )
    Home made modulating auto draw off
    Homemade RO 2 x 4" membranes
    CDL 16 x 16 bottler
    Wesfab 7" filter press
    Delaval 73 vacuum pumps

    12 hives of bees

  3. #3
    Join Date
    Dec 2002
    Location
    Rock Creek, NC
    Posts
    5,807

    Default

    I got one at Ace Hardware for my press. It's not an exact replacement but works as it should.
    Russ

    "Red Roof Maples" Where the term "boiling soda" was first introduced to the maple world!

    1930 Ford Model AA Doodlebug tractor
    A couple of Honda 4 wheelers
    Four chainsaws and no chickens!

  4. #4
    Join Date
    Nov 2008
    Location
    st.marys,pa.
    Posts
    63

    Default wesfab

    OK guys thanks. I bought one from NAPA but doesnt seem to register any pressure,so I will take your advice and try one from your suggestion.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts