Does anyone happen to know a manufacturer part number for a DeLaval 78 oil shaft seal. Or do you know how to find it online easier than me? Thanks in advance.
Sap Runnin. Pump Isn’t.
Does anyone happen to know a manufacturer part number for a DeLaval 78 oil shaft seal. Or do you know how to find it online easier than me? Thanks in advance.
King 2x6 with Steam-Away
16x34 Sugarhouse
460 on Vac
I thot this was supposed to be a hobby
Hamby Dairy Supply.
Just do a search for delaval 78 and parts should come up.
I ordered new oilers for a surge pump through them. If they don’t have it listed just call them. They will be able to help you out.
600 taps on vacuum
Lapierre mechanical Releaser
CDL electric releaser
2.5 x 10 CDL Venturi ( new for the 2024 season )
Home made modulating auto draw off
Homemade RO 2 x 4" membranes
CDL 16 x 16 bottler
Wesfab 7" filter press
Delaval 73 vacuum pumps
12 hives of bees
Parts Dept Dairy Supply in Sharon Ct. They should have the oil seals in stock. Listed at $7.50 each.
If you need it quick, Lyons Dairy Service in Derby is a DeLaval dealer.
Sugaring for 45+ years
New Sugarhouse 14'x32'
New to Me Algier 2'x8' wood fired evaporator
2022 added a used RB25 RO Bucket
250 mostly Sugar Maples, 15% Soft Maples. Currently,(110on 3/16" and 125 on Shurflo 4008 vacuum, 15 gravity), (16,000 before being disabled)
1947 Farmall H and Wagon with gathering tank
2012 Kubota with forks to move wood around
Did you get your pump up and running?
Sugaring for 45+ years
New Sugarhouse 14'x32'
New to Me Algier 2'x8' wood fired evaporator
2022 added a used RB25 RO Bucket
250 mostly Sugar Maples, 15% Soft Maples. Currently,(110on 3/16" and 125 on Shurflo 4008 vacuum, 15 gravity), (16,000 before being disabled)
1947 Farmall H and Wagon with gathering tank
2012 Kubota with forks to move wood around
Hey all. Yes, NAPA had the bearings and took a day to get the oil seal but now I have an extra on hand. The good news is that the shaft seal seems to be holding but like in the other post, the end plates are leaking. I tried the paint on Permatex but it just heated up and melted away and now we have another haz-mat situation. The DeLaval dealer in Middlebury said to use Hi-Temp RTV on the end plates. So, tomorrow morning when I get home from work I'll seal the plates. Thanks everyone for the info and for checking in. I'll let ya know how it goes.
King 2x6 with Steam-Away
16x34 Sugarhouse
460 on Vac
I thot this was supposed to be a hobby
Posting Permissions
Reply With Quote