+ Reply to Thread
Results 1 to 2 of 2

Thread: Monitors tied into last lateral

  1. #1
    Join Date
    Apr 2019
    Location
    Westernville NY CNY
    Posts
    23

    Default Monitors tied into last lateral

    We have always used a separate saddle when installing monitors. Talking with a large producer he stated that he tees into last lateral. That way if the sensor has a leak you can tell easier. Anyone else try this or can think of a downside?

  2. #2
    Join Date
    Jan 2006
    Location
    Oneida NY
    Posts
    11,564

    Default

    I only put them on their own saddle and I use a 2-3' long 3/16 or 5/16 line, then I tie them to a tree trunk, held upright.
    Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
    Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
    Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
    After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts