We have always used a separate saddle when installing monitors. Talking with a large producer he stated that he tees into last lateral. That way if the sensor has a leak you can tell easier. Anyone else try this or can think of a downside?
We have always used a separate saddle when installing monitors. Talking with a large producer he stated that he tees into last lateral. That way if the sensor has a leak you can tell easier. Anyone else try this or can think of a downside?
I only put them on their own saddle and I use a 2-3' long 3/16 or 5/16 line, then I tie them to a tree trunk, held upright.
Dave Klish about 400 taps, down from much more. Retired from collecting and boiling in 2021. Mostly because of a bad hip.
2012 Mahindra 36 HP 4x4/ loader/cab/heat/AC:-)
3x8 raised flue evaporator
250 GPH converted to electric, RO by Ray Gingerich
6.32 KW solar system, 1.48KW is battery backed up, all net metered
website: www.cnymaple.com