Thanks for correcting me Maple Flats. Misspoke there I guess. I modified my post so should be correct now.
Thanks for correcting me Maple Flats. Misspoke there I guess. I modified my post so should be correct now.
12 x 16 shack with 8 x 16 addition
2 x 6 D&G raised flue with hood
Homebuilt releasers
220 taps on vac
100 plus taps on buckets
Gast 1550 on gas engine
HF vac pump on generator
I’m trying to figure out why t-ing the permeate lines together would help. It seems like if you just ran each vessels permeate line into the permeate tank that would be the least amount pressure.
Sent from my iPad using Tapatalk
Well I did check and I was wrong on the sap feed location, it does not go to the center as I had thought, but the concentrate does come out of the center on the second post. I am guessing the concentrate from the second post should go to the outside of the third post and will return at a high brix from the center of the third post. Is this correct? If so any guesses what I might see for a concentration.\?
Scott Knapp
5x14 Pellet Evaporator
3200 Taps 2021
1700 Taps 2019
3/16 Gravity 1000 Taps
5/16 Vacuum 2200 Taps
Northern NY (Canadian border north)
sknapp6978@gmail.com
https://www.facebook.com/Knapps-Sapp...0168377726255/
Just to be clear the post is stainless steel https://www.wateranywhere.com/4-x-40...3-4-1-2-ports/ and I am using brand new membranes from MES.
Scott Knapp
5x14 Pellet Evaporator
3200 Taps 2021
1700 Taps 2019
3/16 Gravity 1000 Taps
5/16 Vacuum 2200 Taps
Northern NY (Canadian border north)
sknapp6978@gmail.com
https://www.facebook.com/Knapps-Sapp...0168377726255/
I explained it the only way I know. Someone with a background in RO builds please explain how they should be plumbed.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
I get it know and do understand what you are saying about plumbing it now. I have a suspicion that the previous owner moved plumbing around for what ever reason, so I will have to re do it. Thanks for the help, if it hadn't asked I would have been very frustrated. Thanks for the help
Scott Knapp
5x14 Pellet Evaporator
3200 Taps 2021
1700 Taps 2019
3/16 Gravity 1000 Taps
5/16 Vacuum 2200 Taps
Northern NY (Canadian border north)
sknapp6978@gmail.com
https://www.facebook.com/Knapps-Sapp...0168377726255/