Thank you for the reply. Good info. The bracket keeps the Belimo in place so that it doesn't just spin around while trying to open the valve?
BW
Thank you for the reply. Good info. The bracket keeps the Belimo in place so that it doesn't just spin around while trying to open the valve?
BW
'12 15 jugs - Steam pans
'17 125 3/16 - 18" x 72" drop flue on homemade arch
'18 240 3/16 - Deer Run 125
'19 450 3/16 - Converted RO to electric/added a membrane
'20 600 3/16 - Maple Pro 2x6 Raised Flue, added AOF/AUF
'21 570 3/16 - Built steam hood, Smoky Lake filter press
'22 800 3/16 - Upgraded RO to 4 4x40
'23 500 3/16 - Re-plumbed RO, new "Guzzler"
'24 900 3/16 - Steam Away, DIY 8x40 RO
Yes. It connects to the bottom of the belimo and bolts to the valve.
600 taps on vacuum
Lapierre mechanical Releaser
CDL electric releaser
2.5 x 10 CDL Venturi
Home made auto draw off
Homemade RO 2 x 4" membranes
CDL 16 x 16 bottler
Wesfab 7" filter press
Delaval 73 vacuum pumps
12 hives of bees
Good deal, if you get a chance, could I get a photo or link when you get a chance?Originally Posted by Bricklayer
'12 15 jugs - Steam pans
'17 125 3/16 - 18" x 72" drop flue on homemade arch
'18 240 3/16 - Deer Run 125
'19 450 3/16 - Converted RO to electric/added a membrane
'20 600 3/16 - Maple Pro 2x6 Raised Flue, added AOF/AUF
'21 570 3/16 - Built steam hood, Smoky Lake filter press
'22 800 3/16 - Upgraded RO to 4 4x40
'23 500 3/16 - Re-plumbed RO, new "Guzzler"
'24 900 3/16 - Steam Away, DIY 8x40 RO
PID parameters
Anyone could share PID parameters?
Thanks
JP
For some reason I can’t post pictures. Is the site not allowing pictures to be attached to posts anymore ? I have a wiring diagram that I have been trying to post.
Here are the parameters that should work.
I have not had the time to fully test mine on the evaporator yet but it seems to work and modulate the valve.
INTY = P100
OUTY = 1
COTY = 4-20 ma
RD = 1 ( cooling )
OT = 2
HY = 0.1 ( this means it will go .1 degrees higher then your set temperature before it starts to open valve )
600 taps on vacuum
Lapierre mechanical Releaser
CDL electric releaser
2.5 x 10 CDL Venturi
Home made auto draw off
Homemade RO 2 x 4" membranes
CDL 16 x 16 bottler
Wesfab 7" filter press
Delaval 73 vacuum pumps
12 hives of bees
Posting Permissions
Reply With Quote